User manual NUMARK CDN36

[. . . ] CDN 36 PROFESSIONAL DUAL CD PLAYER OWNER'S MANUAL ©2002 Industries http://www. numark. com CDN 36 SAFETY INSTRUCTIONS a) b) c) d) e) f) Read Instructions - All the safety and operating instructions should be read before this product is connected and used. Retain Instructions - The safety and operating instructions should be kept for future reference. Heed Warnings - All warnings on this product and in these operating instructions should be followed. Follow Instructions - All operating and other instructions should be followed. [. . . ] To change modes hold down the time button for 3 seconds and the display will flash the play " " and pause " " icons. In PLAY/PAUSE mode, moving the crossfader away from the unit side pauses right where it is, and resumes when the fader is brought back to the unit. To change modes back to PLAY-CUE hold down the time button for 3 seconds and the display will flash the play " " and cue " " icons in the display. Remote Assignment Switch - Set this switch in the position for the method of remote start you will be using. Foot switches are often used for creative mixing techniques and can be found in most music shops. Connector plugs are often ¼" and an adapter to 1/8" will be needed for connection. There are also two types of footswitches that will work with this connector. The first is a typical, on/off pushbutton switch and are generally used for switching channels on guitar amps. The second switch is a momentary footswitch and is usually used for keyboard sustain pedals. If you are unsure of the style of switch you have, try each position until it works as desired. · · · ON-OFF ­ for use with an ON-OFF switch. MOMENTARY ­ for use with a momentary style of switch. MIXER ­ for use with a fader start compatible DJ mixer - The Leader in DJ Technology -8- ©2002 Numark Industries http://www. numark. com CDN 36 DISPLAY FEATURES 1. 9. CUE - Flashing when the unit is setting a cue point. Lit continuously when the unit is paused at a cue point. PAUSE (II)- Active when the unit is paused. PLAY (>)- Active while the unit is actually playing a CD. TRACK - Shows the track that the unit is playing. TOTAL ­ indicates when total CD remaining tracks are displayed. MINUTES - Shows the minutes elapsed or remaining depending on mode setting. SECONDS - Shows the seconds elapsed or remaining depending on mode setting. FRAMES - The CD Player breaks down a second into 75 frames for accurate cueing. [. . . ] If NUMARK determines that any mixer is not covered by this Limited Warranty, purchaser must pay all parts, shipping, and labor charges for the repair or return of such mixer. What are the limits on NUMARK'S liabilities?THE WARRANTIES GIVEN IN THIS LIMITED WARRANTY, TOGETHER WITH ANY IMPLIED WARRANTIES COVERING NUMARK MIXERS, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, NUMARK SHALL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL, INDIRECT OR SIMILAR DAMAGES, LOSS OF PROFITS, DAMAGES TO PURCHASER'S PROPERTY, OR INJURY TO PURCHASER OR OTHERS ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE ANY NUMARK MIXER, BREACH OF WARRANTY, OR NEGLIGENCE, INCLUDING BUT NOT LIMITED TO NUMARK'S OWN NEGLIGENCE, EVEN IF NUMARK OR ITS AGENT HAS BEEN ADVISED OF SUCH DAMAGES, OR FOR ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER PARTY. [. . . ]