User manual NUMARK DM3001

[. . . ] Professional Disc Jockey Products DM3001X DJ MIXER Owner's Manual ©2001 Industries http://www. numark. com DM3001X Safety Information SAFETY INSTRUCTIONS Read Instructions - All the safety and operating instructions should be read before this product is connected and used. b) Retain Instructions - The safety and operating instructions should be kept for future reference. c) Heed Warnings - All warnings on this product and in these operating instructions should be followed. d) Follow Instructions - All operating and other instructions should be followed. [. . . ] A tight curve (right position) turns on the opposing audio signal with very little crossfader movement. A loose curve (left position) makes very long and smooth segues in transition. Hamster switch with Off position ­ reverses the direction of the crossfader. In the center position the crossfader is deactivated. Crossfader Assign ­ channels 1 or 2 can be assigned to the left. Channels 2 and 3 can be assigned to the right. If for example channels 1 and 3 were selected then "Hard left" selects Channel 1 and "Hard right" selects Channel 3. With the crossfader centered, both assigned channels are live. Use the crossfader for fast and seamless segues from one selected channel to the other. Note: If channel 2 is selected on both sides, the crossfader will turn off channel 2 in the left position and turn it on in the right position Note: The crossfader is user replaceable in case of failure. Simply unscrew the two large screws that hold it in place, lift it out and disconnect its cable. Re-attach the new crossfader and screw the mounting plate back onto the unit - you're back in business!Channel PFL/Cue Assign - are used to route Pre Fader Level (PFL) channel audio to the Monitor Section. The channel faders do not control the Cue volume. PFL Meter Indicator ­ lights when PFL audio is not being sent to the LED meter. When the LED is off the channel audio the sent to the meter display for PFL matching. Accurately match channel levels with the Pre-fader gain controls before mixing them together. The idea is to properly match PFL inputs, not the input with the stereo output meter!Headphone Mix - controls the mix of PFL and PGM signals to your headphones. When the slider is moved to the left, all you will hear is the cue source. When the slider is all the way to the right, you will hear what is playing through the master output. By blending, beats can be matched exactly and segues can be smooth when a song is cued. [. . . ] Repaired mixer will be warranted for a period equal to the remainder of the original Limited Warranty on the original mixer or for (90) days, whichever is longer. All replaced parts, components, boards and equipment become the property of NUMARK. If NUMARK determines that any mixer is not covered by this Limited Warranty, purchaser must pay all parts, shipping, and labor charges for the repair or return of such mixer. What are the limits on NUMARK'S liabilities? [. . . ]