User manual NUMARK PRO TT-1

[. . . ] ® Professional Disc Jockey Products PROFESSIONAL DIRECT DRIVE TURNTABLE PRO TT-1 OWNER'S MANUAL INDUSTRIES 11 Helmsman Avenue, North Kingstown, RI 02852 ©1999 http://www. numark. com PRO TT-1 Safety Information and Product Registration CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE ANY COVER. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY. The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the user to the presence of un-insulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying this appliance. 7. [. . . ] -3. 3% - outer row 0% - large dots +3. 3% - next row +6% - inner row 6. Platter - Place this on the Center Spindle (7) and carefully position with the Alignment Pins (17) 7. Center Spindle - Keeps platter and records centered. Place the supplied slipmat on the Center Spindle now. - The Leader in DJ Technology ©1999 Industries 6 http://www. numark. com PRO TT-1 8. 45 Adapter - Place on Center Spindle (7) for playing 7" records with large center holes. Forward/Reverse Buttons - These determine the direction the platter will spin. Lid Hinge Holder - Place the bottom tabs of your lid hinges in here after you finish assembly. Extra Stylus Holder - Place extra headshells here. Tone Arm Assemble - Explained in tonearm section 13. Pitch Adjust - use this the change the speed of the platter when quartz lock is inactive. You can adjust the revolutions by ±10%. Voltage Selector - with unit unplugged set the desired voltage for your location using a screw driver. 115V 14. Quartz Lock On - will hold the revolution speed at exactly the specified speed (3) Off - will allow use of the Pitch Adjust (13) 15. LCD Display - Explained in Display Section 16. Target Light - Press the button to the right and a light will pop up directed at the stylus position. 230V TONE ARM ASSEMBLY 30 29 28 20. When installing a cartridge, refer to the installation instructions supplied by the manufacturer of that cartridge. During installation, attach the stylus protector to guard the stylus tip from damage. Attach wires as follows: White (L+)Left channel+ Blue (L-)Left channel Red (R+)Right channel+ Green (R-)Right channel 27 25 24 23 21. Headshell Locking Nut - Attach headshell by inserting into the front end of the tonearm, then turn the locking nut clockwise with the head shell firmly held horizontally. 26 22 22. Tone Arm Clamp and Rest - Use this rest the tone arm and clamp it in position during transportation. 21 20 24. Tone Arm Lift - This elevates the tone arm above the record surface 25. Tone Arm Lift Adjust Screw - Controls the amount of lift 26. [. . . ] All replaced parts, components, boards and equipment become the property of NUMARK. If NUMARK determines that any mixer is not covered by this Limited Warranty, purchaser must pay all parts, shipping, and labor charges for the repair or return of such mixer. What are the limits on NUMARK'S liabilities?THE WARRANTIES GIVEN IN THIS LIMITED WARRANTY, TOGETHER WITH ANY IMPLIED WARRANTIES COVERING NUMARK MIXERS, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. [. . . ]