User manual NUMARK RM6

[. . . ] Professional Disc Jockey Products RM6 Professional Single Space Rack Mixer Owner's Manual ©2000 Industries http://www. numark. com RM6 Safety Information i) j) k) l) m) n) o) SAFETY INSTRUCTIONS a) Read Instructions - All the safety and operating instructions should be read before this product is connected and used. Retain Instructions - The safety and operating instructions should be kept for future reference. Heed Warnings - All warnings on this product and in these operating instructions should be followed. Follow Instructions - All operating and other instructions should be followed. [. . . ] The middle position sends channel audio to both zones Mic Gain Control ­ controls the mic volume for the NeutrikTM "Combo" connector on the front panel. Mic Gain Control ­ adjusts the Treble, Middle, and Bass frequencies respectively of the mic audio. NeutrikTM "Combo" connector - allows connection of either a 1/4" jack or an XLR jack. This is ideal for connecting an XLR gooseneck directly into the mixer. 9. OUTPUTS Zone Fader ­ controls the overall output level. Mono/Stereo ­ sets this mode for the output audio. Panning ­ controls the mix of stereo audio available from the channel. When moved to the left only the left speakers will be heard, or to the right for the right speakers. 2. Stereo Level Indicator- quickly and accurately tracks level of audio output. When using as a master output meter, set the crossover, equalizer and power amp inputs to avoid distortion at each step in the audio chain. Proper attention to the peak meter results in the punchiest possible sound without audible distortion. Zone EQ ­ adjusts the Treble, Middle, and Bass frequencies respectively of the zone audio. Headphone Level ­ adjusts headphone volume. 13. Headphone Jack ­ for plugging in your headphones. Rear Panel Features 14 15 16 22 17 18 19 20 21 23 24 25 26 28 27 14. Power Supply Input - to plug your power adapter in before switching on power. Balanced Zone 2 Outputs - are 1/4" Stereo Balanced TRS 1/4" connectors controlled by the Zone 2 fader knob. Power transformers and other devices that cause magnetic fields can induce hum in audio cables. This can be best resolved by using balanced lines where inputs and outputs permit. Balanced lines are also the most effective means of reducing or eliminating RF or radio frequency" interference. Balanced Zone 1 Outputs - are Balanced Stereo XLR connectors controlled by the Zone 1 fader knob. Master Gain Reduction ­ to set optimal output level of the balanced outputs to be set at . 245V to 2. 5V to match the optimal inputs of amplifiers and other devices. Unbalanced Zone Outputs ­output controlled by the Zone fader knobs. [. . . ] Repaired mixers will be warranted for a period equal to the remainder of the original Limited Warranty on the original mixer or for (90) days, whichever is longer. All replaced parts, components, boards and equipment become the property of NUMARK. If NUMARK determines that any mixer is not covered by this Limited Warranty, purchaser must pay all parts, shipping, and labor charges for the repair or return of such mixer. What are the limits on NUMARK'S liabilities? [. . . ]