User manual NUMARK WS32

[. . . ] This Limited Warranty allocates risk of product failure b etween purchaser and NU MARK, and NUMARK'S product pricing r eflects this allocation of risk and the limitation s of liability contained in this L imited Warranty. The agents, employees, distr ibutors, and dealers of NUMARK are not authorized to make modifications to this Limited Warranty, or make additional warrantie s binding on NUMARK. Accordingly, additional statements such as dealer adver tising or presentation, whether oral or written, do not constitute warrantie s by NUMARK and should not be relied up on. Some jurisdictions do not allow limitations on how long an impl ied warranty lasts, so the above limitation may not app ly to you. [. . . ] This microphone features quartz controlled, fixed frequency VHF high band operation. IMPORTANT SAFEGUARDS To prevent hurt from heavy article dropping, do not put heavy article on the top of this equipment. Forbidden CAUTION RISK OF HUMAN HEAVY INJURY OR GOODS DAMAGE IF USE IMPROPERLY 1 During Operation Table of Contents Introduction Parts Description Features & Specification Users Guide Important Safeguards 1 2 3 4 5-6 Clear the dust inside regularly. Accumulated dust inside for a long period of time is apt to cause fire. Contact Promic dealer for inside dust cleaning. Keep power plug and outlet clean. Power plug and outlet with accumulated dust is apt to cause fire, clean them regularly. Insert power plug into power outlet entirely. Caution Caution To reduce the risk of fire or electric shock, turn off the power and pull out the plug for safety if this equipment will not be used for a long period of time after set-up. Pull Out AC Plug System Contents 1. Users Manual x 1 WARNING RISK OF HUMAN HEAVY INJURY OR DEATH IF USE IMPROPERLY During Setup and Installation To reduce the risk of fire or electric shock, do not put this equipment into water or make it wet. Forbidden Forbidden Forbidden To reduce the risk of electric shock, use only the specified power voltage. To reduce the risk of fire or electric shock, do not damage the power cord or place it close to hot apparatus. Do not put heavy article on the cord. To prevent damage from dropping or inclining , do not put equipment on shaking, inclining etc. During Operation To reduce the risk of fire or electric shock caused by continued use when abnormity occurs, please pull out power plug and contact Promic dealer when the following happens: 1. When smoke comes out from this equipment and peculiar smell can be smelt. 2. Water or other article goes into this equipment. 3. Drop on the ground and cover is damaged. 4. Power cord damaged (core comes out or cord is broken). 5. No sound output. Forbidden Caution 1 6 5 IMPORTANT SAFEGUARDS CAUTION 1 Do not open this product by yourself for adjustment. 2 If water goes into this product, please turn off the power immediately and send it to after-sale service department of our company for handling. 3 One receiver cannot receive signal from two same frequency microphones simultaneously. Other microphone with different frequency or brand cannot be used for this receiver. PARTS DESCRIPTION Parts Description 1. Receiver (3) (1) (2) Front Panel (1) Power LED Indicator (2) Microphone Signal LED Indicator (3) Antenna WARNING RISK OF HUMAN HEAVY INJURY OR DEATH IF USE IMPROPERLY During Operation To reduce the risk of fire or electric shock, do not remove the cover. Submit this equipment to Promic dealer for examination, adjustment and repair. Do not put vessel of liquid or small metal parts on the top of this equipment. To reduce the risk of fire or electric shock, do not let metal or flammable parts drop into this equipment. To reduce the risk of shock, do not touch power outlet when it thunders. Do Not Disassemble Back Panel Forbidden (4) (5) (6) (7) Forbidden Do Not Touch (4) Volume Control (5) AF Output (6) DC Input (7) Power Switch CAUTION RISK OF HUMAN HEAVY INJURY OR GOODS DAMAGE IF USE IMPROPERLY During Setup and Installation To reduce the risk of electric shock, do not pull power plug with wet hands. [. . . ] 5 Turn on microphone power switch, LED indicator will flash once then off , it indicates that microphone is ready to use. 6 At this time receiver's RF LED indicator will light. Adjust volume control to make receiver s volume to be in normal working state. Finish test of wireless microphone. Wireless Microphone Features and Specification 1. [. . . ]