User manual OCTEK FD1803

[. . . ] FD1803-E Powerline Ethernet Bridge FD1803-U Powerline USB Adapter User's Manual Contents 1. Introduction 1. 1 Overview 1. 2 Features & Specifications 1. 2. 1 Features 1. 2. 2 Specifications 1. 3 Package Contents 3 3 4 4 5 6 7 7 8 9 11 13 18 18 19 20 25 26 28 28 30 31 32 33 34 2. Installing FD1803-E Procedures 2. 1 FD1803-E Product Outlook 2. 2 FD1803-E LED Display 2. 3 Hardware Installation 2. 4 Setting the IP Address 2. 5 Installing Utilities and Connecting FD1803-E 3. Installing FD1803-U Procedures 3. 1 FD1803-U Product Outlook 3. 2 FD1803-U LED Display 3. 3 Installing Utilities and Connecting FD1803-U 3. 4 Connecting FD1803-U 3. 5 Setting the IP Address 4. [. . . ] Do not plug the device into a UPS or power strip with surge protection. The FD1803-E has its own power filter for protection against surges. Insert the Setup utility CD-ROM into the computer's CD-ROM drive. In the box that appears, enter D:\FD1803-E\setup. exe (Where D is the letter of your CD-ROM drive). Figure 2-3 Preparing to Install Screen 2. The CD will launch an installation utility similar to that shown in Figure 2-4. Click the Next button to continue. 13 Figure 2-4 Welcome Screen 3. Accept terms and click Next to continue. Figure 2-5 Restricted Software License Agreement Screen 4. Enter User Name and Organization. User Name and Organization have on importance in installation process and device operation. Click Next to Continue. 14 Figure 2-6 Customer Information Screen 5. Click the Finish button to exit the installation utility. Figure 2-7 Confirm Screen Windows 2000 users: Windows will inform you that there was no digital signature found. Click the Yes button to proceed with the installation. 15 Windows XP users: Windows will notify you that the software has not passed Windows Logo testing. When prompted by the Install Utility, Plug in the FD1803-E. To plug in the FD1803-E, you need to: · Plug the supplied power cord into the FD1803-E and an AC outlet. · Plug any Ethernet cable into the FD1803-E and an available Ethernet port on your PC. For more information, refer to 2. 6 Connecting FD1803-E. Figure 2-8 Inform to Connect FD1803-E Screen 7. Click the Finish button to exit the installation utility. 16 Figure 2-9 Installation Completed Screen 8. You may be asked to restart your computer. Click the Yes button to restart now, or click the No button to restart later. Figure 2-10 Confirm to Reboot Screen 9. The installation of the PowerPacket Configuration Utilities is complete. 17 3. Installation FD1803-U Procedures 3. 1 FD1803-U Product Outlook FD1803-U Front Panel Using the USB port connects to PC's USB port. Figure 3-1 Front View of FD1803-U FD1803-U Rear Panel Using the Powerline Port connects to power outlet. Figure 3-2 Rear View of FD1803-U 18 3. 2 FD1803-U LED Display FD1803-U LED Explanation: LED USB LINK Function Lights to indicate the powerline device has plugged into a USB port. Green Lights to indicate that the powerline device has plugged into powerline and found other powerline device(s). Green Lights to indicate there is powerline network traffic. Orange Flashes to indicate there is a collision. [. . . ] A second column indicates their data rate measurements in Mbps. Press Scan Powerline Network button to refresh the listed information. Figure 4-2 Network Dialog Screen 30 4. 3 Setting Network Password After installing your FD1803-E Ethernet Bridge or FD1803-U USB Adapter and USB driver, you will run the Security Configuration Utility for each Powerline device. This utility will set up security using a network password. FD1803-E/U all use "HomePlug" as a default network password. [. . . ]