User manual OCTEK NVIDIA GEFORCE 4 TI

[. . . ] You may also enter wireless network encryption keys by checking Network Authentication (Shared mode) or Data encryption (WEP enabled). You may enter up to four keys of length 10 or 25 hexadecimal digits. You may also set one of the four keys as a default key. Data Encryption: Select Enabled or Disabled. Authentication: Open Authentication - The CardBus is visible to all devices on the network. [. . . ] infrastructure and ad hoc network, infrastructure network only, or ad hoc network only. You may also automatically 13 3. 1 Status Tab After clicking on the Configuration Utility icon, the Status screen will display the settings for the CardBus: SSID: The Service Set Identifier is the name assigned to the wireless network. The factory SSID setting is default. BSSID: The CardBus hardware MAC address Network Type: The Network Type have three mode (Please see the Getting Option section in this manual for an explanation of these three modes. ) Frequency: 802. 11g indicates that the CardBus is communicating in the 2. 4GHz band. Data Encryption: You can see if WEP (Wired Equivalent Privacy) is Enabled or Disabled here. Speed: This is display wireless and wireless connecting Speed. Authentication State: 14 This is display Authentication State, it's to provide N/A and Connected two state. Signal Strength: A colored bar shows the intensity of the radio signals in the network Under Hardware Information the Media Access Control (MAC) address of the hardware (WLAN CardBus card) is given. The MAC address is a factory given address that cannot be changed. Advanced State shows the Radio Status (ON or OFF). Click OK to accept the connection status and exit the GUI. Click Cancel to not accept the status settings and exit the GUI. Under the Option Tab general settings and advanced settings are shown. 3. 2 Option Tab Under General Setting, Auto launch when Windows starts up: The WLAN automatically launches when Windows starts up. Remember mini status position: Resident in the memory 15 Auto hide mini status: Auto hide the tools Set mini status always on top: It will lock the station. Enable IP setting and Proxy setting in profile: The function will backup previous IP setting now Under WLAN type to connect Infrastructure and Ad-Hoc network: Wireless mode used when connecting Infrastructure and Ad-Hoc two different access point network environment Infrastructure Connecting to the WLAN using an access point. (This is the default setting). Ad-Hoc Wireless mode used when connecting directly to a computer equipped with a wireless adapter in a Peer-to-Peer environment Under Advance Setting : Disable Radio: Disable to send by radio Fragmentation Threshold: The size at which packets will be fragmented. Generally a gateway is used as a funnel for all traffic to the Internet. IEEE Institute of Electrical and Electronics Engineers Infrastructure An integrated wireless and wired LAN is called an Infrastructure configuration. Infrastructure is applicable to enterprise scale for wireless access to central database, or wireless application for mobile workers. ISM Band The FCC and their counterparts outside of the U. S. have set aside bandwidth for unlicensed use in the so-called ISM (Industrial, Scientific and Medical) band. Spectrum in the vicinity of 2. 4 GHz, in particular, is being made available worldwide. This presents a truly revolutionary opportunity to place convenient high-speed wireless capabilities in the hands of users around the globe. 20 Local Area Network (LAN) A LAN is a group of computers, each equipped with the appropriate network adapter card connected by cable/air, that share applications, data, and peripherals. All connections are made via cable or wireless media, but a LAN does not use telephone services. It typically spans a single building or campus. Network A network is a system of computers that is connected. Data, files, and messages can be transmitted over this network. [. . . ] Wide Area Network (WAN) A WAN consists of multiple LANs that are tied together via telephone services and / or fiber optic cabling. WANs may span a city, a state, a country, or even the world. Copyright Statement No part of this publication may be reproduced. Stored 22 The information in this guide may change without notice. [. . . ]