User manual OKI B710DN

[. . . ] Improper Setup icons alert you to devices and operations that are not compatible with the printer. Trademarks Brother and the Brother logo are registered trademarks and BRAdmin Professional is a trademark of Brother Industries, Ltd. UNIX is a registered trademark of The Open Group. Apple, Macintosh and LaserWriter are registered trademarks of Apple Computer, Inc. HP, Hewlett-Packard, Jetdirect and PCL are registered trademarks of Hewlett-Packard Company. [. . . ] Make sure you submit the changes (click the Submit button). Changing the Workgroup/Domain Name using TELNET If you are unable to use the BRAdmin Professional utility, you can use TELNET. When you are connected to the print server, enter the default password access in response to the # prompt. Type in anything in response to the Enter Username> prompt, you will then be at the Local> prompt. Now enter the command: SET NETBIOS DOMAIN domainname EXIT Where domainname is the name of the domain or workgroup that you are on. If you are not sure what your domain name or workgroup name is, look in the Identification tab in your Windows® 95/98/Me and Windows NT®4. 0 network applet. 5-3 Network printing from Windows®: NetBIOS Peer-to-Peer printing Installing the Brother NetBIOS Port Monitor The Brother NetBIOS Port Monitor requires the TCP/IP transport protocols to be installed on your Windows® 95/98/Me/2000/XP and Windows NT®4. 0 computer. To install those protocols, see your Windows® documentation. If you are using the TCP/IP protocol, the proper IP address should be defined on both the Brother print server and your client PC. Note If you already installed the driver from the printers CD-ROM Installer and you selected "Brother Peer-to-Peer Network Printer" during the installation, then you do not need to install the Brother Network Print Software again. 5 1 2 3 4 5 6 7 8 9 Start the CD-ROM installation menu program according to the printer Quick Setup Guide. Select your model and the desired language. Then click Install Other Drivers or Utilities. Select the Network Print Software installation program. Enter any desired name for the Brother printer and click Next. For example, you could call the printer "Networked Brother Printer". Windows® will now ask you if you wish to print out a test page, select Yes and then select Finish. You are now ready to print. If necessary, you can share the printer on your PC so that all print jobs are routed through your computer. Windows NT®4. 0 / Windows® 2000/XP 1 2 3 4 For Windows® XP: Go to the Start button and select Printers and Faxes. For Windows® 2000: Go to the Start button, select Settings and then Printers. For Windows® XP: Select Add a printer to begin the printer installation. For Windows® 2000 and Windows NT® 4. 0: Double click Add Printer to begin the printer installation. Click Next when you get the Add Printer Wizard window. Select Local printer (Windows® 2000), Local printer attached to this computer (Windows® XP) or 5-5 Network printing from Windows®: NetBIOS Peer-to-Peer printing My computer (Windows NT® 4. 0) when you are asked how the printer is connected to your computer, and then click Next. 5 6 7 8 9 10 Select the Brother NetBIOS Port (the port name you assigned in step 8 of the "Installing the Brother NetBIOS Port Monitor" section and click Next. If you have selected a printer driver that is already used, you have the option of either keeping the existing driver (recommended) or replacing it. Select the desired option and click Next. [. . . ] 2-3 H HTTP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9, 2-6, 3-13 Hyper Text Transfer Protocol . . . . . . . . . 2-6, 3-13 Q Quick Setup Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 I-1 Index R RARP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8, A-2 RFC 1001 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]