User manual OKI C9800HN EFI FIERY GUIDE

[. . . ] About the Documentation This manual is part of a set of Fiery Network Controller for C9800, herein referred to as the "Fiery, " documentation that includes the following manuals for users and system administrators. Most are available as Acrobat PDF (Portable Document Format) files on the User Documentation CD. · The User Software Installation Guide describes how to install software from the User Software CD to enable users to print to the Fiery Network Controller for C9800 with the EFI PostScript driver, and also describes setting up printing connections to the Fiery. · The Configuration Guide explains basic configuration and administration of the Fiery for the supported platforms and network environments. [. . . ] The Two-Way Communication feature also updates Expert Color Settings options to reflect the current color settings on the Fiery. To access the Expert Color Settings options, click the Expert Settings tab in the ColorWise print option bar of the Fiery printing tab of your printer driver. For more information, see Chapter 1 of the Color Guide. TO SET UP TWO-WAY COMMUNICATION FOR POSTSCRIPT OR PCL PRINTER DRIVERS FOR WINDOWS 2000/XP/SERVER 2003 1. In the Installable Options (PS) or Device Options (PCL) tab, select Two-Way Communication. PS 2. Type the C9800's IP address or DNS name. PCL 1 1-31 Setting up PostScript or PCL printing with Windows 2000/XP/Server 2003 3. In the PS driver, to display the C9800's current default settings when opened, select Update Fiery Driver When Opened. In the PS driver, to receive an e-mail notification after your job has been printed, select Enable E-mail Notification, and type in the e-mail address to which notification should be sent. You will also receive e-mail notification of any errors that occur during printing. NOTE: Enable E-mail Notification is displayed only if Email Service is enabled at Setup. Click OK. Completing the Windows 2000/XP/Server 2003 printer connection To print from Windows 2000/XP/Server 2003, you must: · Set up network servers, if any. · Set up the Fiery to accept print jobs from your computer. · Configure a port on each Windows 2000/XP/Server 2003 computer for the network type. To do this Configure the parallel connection Configure the TCP/IP (LPR port) connection Configure the IPX (Novell) connection See "Completing the Windows 2000/XP/Server 2003 parallel port connection" in this section. "Completing the Windows 2000/XP/Server 2003 TCP/IP and Port 9100 or LPR connection" on page 1-33. "Completing the Windows 2000/XP/Server 2003 IPX (Novell) connection" on page 1-34. NOTE: The procedures for completing the printer connection for Windows 2000/XP and Windows Server 2003 are similar. Windows 2000 illustrations are used in the following procedure, with relevant Windows XP differences noted. 1 1-32 Installing User Software on a Windows Computer Completing the Windows 2000/XP/Server 2003 parallel port connection The parallel port cable connects the Fiery to a single computer. Once you have installed the Windows 2000/XP/Server 2003 PostScript printer driver and the Fiery printer description files, complete the setup for parallel port printing. TO SET UP PARALLEL PRINTING FOR WINDOWS 2000/XP/SERVER 2003 1. Windows 2000: Click Start, choose Settings, and then choose Printers. Windows XP: Click Start, and choose Printers and Faxes. Windows Server 2003: Click Start, choose Control Panel, and then choose Printers and Faxes. Double-click the Fiery icon and choose Properties from the Printer menu. In the Ports tab, confirm that LPT1 (Local Port) is selected. The Fiery is ready to accept parallel print jobs from your computer, using the Windows 2000/XP/Server 2003 PostScript printer driver and the Fiery printer description file. 3. Click the General tab and click Print Test Page. [. . . ] For more information about Network Setup and Printer Setup, see Chapter 4 of the Configuration Guide. TO SET UP CLIENT WORKSTATIONS TO USE FIERY WEBTOOLS 1. Make sure the workstation has a valid, unique IP address. Make sure a supported Internet browser is installed on the computer. For more information on supported browsers, see "System requirements" on page -xi. 4. [. . . ]