User manual OKI ES1220NCCS

[. . . ] User's Guide: Windows 59356001 Every effort has been made to ensure that the information in this document is complete, accurate, and up-to-date. The manufacturer assumes no responsibility for the results of errors beyond its control. The manufacturer also cannot guarantee that changes in software and equipment made by other manufacturers and referred to in this Guide will not affect the applicability of the information in it. Mention of software products manufactured by other companies does not necessarily constitute endorsement by the manufacturer. [. . . ] However, several of the driver settings can be left at "Printer Setting, " which will then default to the settings entered in these printer menus How To Make Changes in The Menus ON LINE BACK MENU ENTER CANCEL 1. Press + or ­ to scan through the available menus until the menu you wish to enter appears on the display. NOTE The menus and their various listings will vary depending on which options you have installed on your printer. 3. Use +/ ­ to move up and down through the items in the selected menu. When the item you want to change is displayed, press ENTER to edit that item. Use +/ ­ to move up and down through the available settings for this item. ES 1220n Menu Functions · 172 6. When the setting you wish to use appears on the display, press ENTER. An asterisk (*) appears next to the setting, and the setting flashes. If you are through making settings in the menu, press ON LINE to engage the setting and exit the menu. If you wish to make additional changes in the menu, press BACK to engage the setting. ­ To change another setting in the same menu, use MENU +/ MENU ­ to move through the list of menu items to the one you wish to change, then follow steps 5 though 7. ­ To change the setting for an item in a different menu, press BACK again, then follow steps 2 through 7. For Example: To engage duplex printing (default setting is OFF): 1. Press MENU + and/or MENU ­ repeatedly until you see PRINT MENU 3. Press MENU + and/or MENU ­ repeatedly until you see DUPLEX OFF * 5. Press ENTER to select this item. ES 1220n Menu Functions · 173 6. Press MENU + to change the setting to ON: DUPLEX ON The second line of the display begins flashing. Press ENTER to select the new setting: DUPLEX ON * An asterisk appears on the second line of the display. Press ON LINE to engage the new setting and to exit the menu. The printer returns to standby mode. ES 1220n Menu Functions · 174 Summary of Menu Defaults Menu Defaults Note: Menus/Items with a dagger () only appear when the appropriate option (e. g. , Hard Disk Drive, Duplex Unit, Second Paper Tray, etc. ) is installed. Menu PRINT JOBS MENU Item ENTER PASSWORD SELECT JOB Default Setting **** ALL JOBS [EXECUTE] [EXECUTE] [EXECUTE] [EXECUTE] [EXECUTE] [EXECUTE] [EXECUTE] [EXECUTE] [EXECUTE] 1 OFF TRAY1 ON DOWN DO NOT USE ENABLE 600x1200DPI OFF AUTO PORTRAIT 60 LINES CASSETTE SIZE INFORMATION MENU PRINT MENU MAP PRINT FILE LIST PRINT PCL FONT PRINT PSE FONT PRINT PPR FONT PRINT FX FONT DEMO1 PRINT ERROR LOG SHUTDOWN MENU PRINT MENU SHUTDOWN START COPIES DUPLEX PAPER FEED AUTO TRAY SWITCH TRAY SEQUENCE MP TRAY USAGE MEDIA CHECK RESOLUTION TONER SAVE MODE MONO-PRINT SPEED ORIENTATION LINES PER PAGE EDIT SIZE ES 1220n Menu Functions · 175 Menu Defaults (continued) Note: Menus/Items with a dagger () only appear when the appropriate option (e. g. , Hard Disk Drive, Duplex Unit, Second Paper Tray, etc. ) is installed. Menu MEDIA MENU Item TRAY1 PAPERSIZE TRAY1 MEDIATYPE TRAY1 MEDIAWEIGHT TRAY2 PAPERSIZE TRAY2 MEDIATYPE TRAY2 MEDIAWEIGHT MP TRAY PAPERSIZE MP TRAY MEDIATYPE MP TRAY MEDIAWEIGHT UNIT OF MEASURE X DIMENSION Y DIMENSION Default Setting LETTER PLAIN MEDIUM LETTER PLAIN MEDIUM LETTER PLAIN MEDIUM INCH 8. 5 INCH 11 INCH AUTO [EXECUTE] PRINT PATTERN 0 0 0 0 0 0 0 0 0 0 COLOR MENU DENSITY CONTROL ADJUST DENSITY COLOR TUNING C HIGHLIGHT C MID-TONE C DARK M HIGHLIGHT M MID-TONE M DARK Y HIGHLIGHT Y MID-TONE Y DARK K HIGHLIGHT ES 1220n Menu Functions · 176 Menu Defaults (continued) Note: Menus/Items with a dagger () only appear when the appropriate option (e. g. , Hard Disk Drive, Duplex Unit, Second Paper Tray, etc. ) is installed. Menu COLOR MENU (cont. ) Item K MID-TONE K DARK C DARKNESS M DARKNESS Y DARKNESS K DARKNESS AJST REGSTRATION C REG FINE AJSTS M REG FINE AJST Y REG FINE AJST INK SIMULATION UCR CMY100% DENSITY CMYK CONVERSION Default Setting 0 0 0 0 0 0 [EXECUTE] 0 0 0 OFF LOW DISABLE ON 60 MIN AUTO EMULATION ASCII RAW ON OFF 60 SEC 40 SEC CONTINUE ON OFF SYS CONFIG MENU POW SAVE TIME PERSONALITY PARA PS-PROTOCOL USB PS-PROTOCOL CLRABLE WARNING AUTO CONTINUE MANUAL TIMEOUT WAIT TIMEOUT LOW TONER JAM RECOVERY ERROR REPORT ES 1220n Menu Functions · 177 Menu Defaults (continued) Note: Menus/Items with a dagger () only appear when the appropriate option (e. g. , Hard Disk Drive, Duplex Unit, Second Paper Tray, etc. ) is installed. Menu SYS CONFIG MENU (cont. ) PCL EMULATION Item LANGUAGE FONT SOURCE FONT NO. [. . . ] This message is sometimes displayed during printing. The following message was displayed in the "Printer - Delete a Printer" menu. "Cannot delete while log is being acquired. " A. Run the "Printer - Start/End Log" menu first to cancel the process by which print logs are acquired from the printer at the set interval time, and then run the "Printer - Delete a Printer" menu. [. . . ]