User manual OKI ES2426E NETWORK CARD

[. . . ] Copyright Information Copyright © 2005 by Oki Data Americas, Inc. All Rights Reserved Document Information OkiLAN 8100e Network User's Guide P/N 59349901, Revision 1. 4 September, 2005 Disclaimer Every effort has been made to ensure that the information in this document is complete, accurate, and up-to-date. The manufacturer assumes no responsibility for the results of errors beyond its control. The manufacturer also cannot guarantee that changes in software and equipment made by other manufacturers and referred to in this guide will not affect the applicability of the information in it. [. . . ] Click [Start], select [Settings] and then click [Control Panel]. In the Network dialogue box, click the [Protocols] tab. If the [TCP/IP Protocol] is not listed, click [Add]. In the [Select Network Protocol] dialogue box, select [TCP/ IP Protocol] and click [OK]. The Windows NT installation CD-ROM may be required. Follow the remaining dialogue box prompts. OkiLAN 8100e Network User's Guide Microsoft Windows - 89 Windows 2000 1. Click the [Start] button, select [Settings] and then click [Network and Dial-up Connections]. Double-click the [Local Area Connection] icon. In the [Local Area Connection Status] dialogue box, click [Properties]. In the [Local Area Connection Properties] dialogue box, click [Install]. In the [Select Network Component Type] dialogue box, select [Protocol] and click [Add]. In the [Select Network Protocol] dialogue box, select [TCP/ IP Protocol] and click [OK]. Click [Close] button in the [Local Area Connection Properties] dialogue box. Click [Close] in the [Local Area Connection Status] dialogue box. Windows XP 1. Click the [Start] button and select [Control Panel]. Select [Network and Internet Connection] and [Network Connection]. Double-click [Local Area Connection] and click [Properties] in the [Location Area Connection Status] dialogue box. If the [Internet Protocol (TCP/IP)] is not listed, click [Install. ]. In the [Select Network Component Type] dialogue box, select [Protocol] then click [Add]. In the [Select Network Protocol] dialogue box, select [Internet Protocol (TCP/IP)] then click [OK]. OkiLAN 8100e Network User's Guide Microsoft Windows - 90 7. The Windows XP installation CD-ROM may be required. Follow the remaining dialogue box prompts. Once the protocol has been installed and configured in Windows, the next step is to configure the TCP/IP parameters in the network printer. OkiLAN 8100e Network User's Guide Microsoft Windows - 91 Network printer IP address configuration Use the Admin/Manager Standard Set-up Utility to configure the IP Address, Subnet Mask and Gateway. Connect the printer to the network and turn on. [. . . ] Check the Machine name is the same as the Print Server name set in the File Server. Check the network cable is correctly connected. Check the NIC is connected to the File Server. Check the printer driver has been mapped to the correct netware queue. [. . . ]