User manual OKI LD610UPS USER GUIDE

[. . . ] While all reasonable efforts have been made to make this document as accurate and helpful as possible, we make no warranty of any kind, expressed or implied, as to the accuracy or completeness of the information contained herein. You must obtain written permission from Oki Data Corporation before doing any of the above. Energy Star is a trademark of the United States Environmental Protection Agency. Other product names and brand names are registered trademarks or trademarks of their proprietors. [. . . ] Any copying or conversion into electronic firm and saving of this material without the express written permission of Oki Data Corporation. Use of the information contained in this manual is not subject to any patent liability. This manual has been prepared with utmost care and attention to detail but may contain certain errors and/or omissions. Is not legally liable for any damages resulting from the use of the information in this manual. And its affiliates are not legally liable (United States excluded) for any damages, loss, costs, and/or expenses that result from the breakdown, malfunction, and/or misuse of the product due to violation or neglect of the operation and maintenance information and instructions provided by the Oki Data Corporation. , as well as from the unauthorized alteration, repair, and/or modification of the product by the user and/or third party. Is not legally liable for any damages and/or issues resulting from the use of options and/or parts that are not authentic Oki Data products or authorized products. Content Confirmation The following items should all be contained in the printer package. Contact the dealer from which the purchase was made if any item is damaged and/or missing. Installation & Usage ※ CAUTION - Be careful not to get your fingers pinched when opening or closing the paper cover. Also be careful the paper cover does not slip off and drop. (Refer to below) The current printer status can be viewed via the printer’s LED display. 1) Green LED on - The printer waits for the data from Host (PC) in normal mode. 2) Orange LED on - It means paper gap sensing error. It becomes on when the printer fails to detect the paper or paper jam occurred. When fails to detect the paper correctly use Auto-Calibration function. 4) Green LED blinking - TPH (Thermal Printing Head) overheated or ; - The printers is waiting for the button input to run Auto-Calibration function. Make sure the paper is loaded correctly. 0 - 15 - LD610UPS 3-5 Feed Button Operations Feed Button can be used for various purposes as follows. 1) Feed Label In Print Standby mode, pressed for shorter than 3 seconds, the printer feed one label. 2) Stand-alone Configuration Mode In Print Standby mode, pressed for longer than 3 seconds, the printer enters into Standalone Configuration Mode. 3) Pause and Resume printing If pressed while printing labels, Printing toggled between Pause and Resume. [. . . ] In such case, use media sensor auto-calibration function for a proper detection. 0 - 18 - LD610UPS 5-5 Gap Sensor Manual-Calibration Manual-calibration of media detection can be used when the printer cannot detect a media gap (or black mark) even after auto-calibration has been executed. Users can calibrate sensor parameters in detail by using the utility program provided by the manufacturer. The utility can be obtained from the enclosed CD. [. . . ]