User manual OKI LE810DT ACCESSORY INSTRUCTION GUIDE

[. . . ] ⷠRead and follow all warning and instruction labels on the product itself. Use only a damp cloth; do not use liquid or aerosol cleaners. [. . . ] Your product has a grounded, three-prong plug as a safety feature. This plug only fits into a grounded outlet. If the plug does not fit, the outlet may be an older, non-grounded type. Install the product near an easily accessed power outlet. Do not put anything on it or place it where it will be walked on. If you are using an extension cord or power strip with the product, make sure that the total of the amperes required by all the equipment on the extension is less than the extension's rating. The total ratings of all equipment plugged into the outlet should not exceed 15 amperes. A telephone cable using 26 AWG wire or larger must be used with this equipment. ⷠDo not poke anything into the ventilation slots of the product. You could get an electrical shock or cause hazardous electrical arcing, which could cause a fire. ⷠAside from the routine maintenance described in the documentation, do not try to service the product yourself. Removing the cover may expose you to shocks or other hazards. [. . . ] If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Plug the unit into an outlet on a circuit different from that to which the receiver is connected. Note: It is the responsibility of the user to obtain the required shielded cable in order to ensure compliance of this equipment with FCC regulations. [. . . ]