User manual OKI ML 8480FB

[. . . ] Copyright Information Copyright © 2006 by Oki Data. All Rights Reserved Document Information ________________________________ Microline 8480FB User's Guide P/N 59380401, Revision 1. 1 September, 2006 Disclaimer__________________________________________ Every effort has been made to ensure that the information in this document is complete, accurate, and up-to-date. The manufacturer assumes no responsibility for the results of errors beyond its control. The manufacturer also cannot guarantee that changes in software and equipment made by other manufacturers and referred to in this guide will not affect the applicability of the information in it. [. . . ] Print [the default]: the paper is in a ready-for-printing position. Tear: the paper is at the tear-off position. Language Set Replaces certain standard symbols with special characters used in foreign languages. Choose American [the default], French, German, British, Danish 1, Swedish, Italian, Spanish I, Japanese, Norwegian, Danish II, Spanish II, Latin American, French Canadian, Dutch, or Publisher. Line Spacing The default is 6 LPI (lines per inch). Change to 8 LPI to get more lines on a page. LF Revise (Cut) Adjust the line feed value for manual feed using the platform. The default setting is 0. Load LF Speed Choose the paper feed speed for inserting sheets when you are using manual feed from the platform: Fast Speed [the default] or Slow Speed. Memory Auto Align The default is Valid. This causes the Auto Align setting made using the front panel switches MODE and SHIFT (see page 11) to be stored in the printer's memory. Change to Invalid if you do not wish this value to be stored. Multi Pass Select the print direction (Bi-directional: the default, or Uni-directional) for a line containing double-height print. Page Length Choose the length of the manual feed paper you are using: 279. 4 mm (11") [the default] or 304. 8 mm (12"). Microline 8480FB User's Guide · 47 Page Width Choose the width of the continuous forms paper you are using: 8", 10. 6", 13. 2", or 13. 6" [the default]. Paper End Choose what happens when paper end is detected when you are using manual feed from the platform: On-line [the default] or Offline. Parallel I/F Only Nibble Mode supports bi-directional. Choose the printing used by the parallel interface: Uni-directional or Bi-directional [the default]. Path Change Choose whether or not the Tear Off feature (see page 61) is engaged when you change to the continuous forms path. To set the printer to automatically engage the Form Tear feature when it switches to continuous forms printing, change the setting to Tear Off. PE Adj. (Cut) [Paper End Adjust (Manual Feed)] For fine tuning the location of the last line of printing (Paper End) when using manual feed from the platform. Settable from -15 to +15 in increments of 1/120 inch. Negative values allow printing further down on the form: · Paper End moves down · paper moves up. Positive values stop the printing further up on the form: · Paper End moves up · paper moves down Microline 8480FB User's Guide · 48 PE Adj. (Front) [Paper End Adjust (Front Feed)] For fine tuning the location of the last line of printing (Paper End) when using continuous forms (front feed). Settable from -15 to +15 in increments of 1/120 inch. Negative values allow printing further down on the form: · Paper End moves down · paper moves up. Positive values stop the printing further up on the form: · Paper End moves up · paper moves down PE Pos. [Paper End Position] This sets when the the printer will move to the next continuous form, based on the distance between the center of the characters on the last line of the form and the bottom of the form. Available settings: 3. 18 mm (1/8") or 6. 35 mm (1/4") [the default]. Pitch Choose the character width, in characters per inch (cpi): 10 [the default], 12, 15, 17. 1, or 20 cpi. Power Save Time Sets the time the printer waits before entering the Power Save Mode when Power Saving is set to Enable [the default]: 5 min, 10 min [the default], 15 min, 30 min, or 60 min. Power Saving Sets whether or not the printer enters the energy-saving Power Save Mode after the interval specified under Power Save Time. Cmd. The default is Valid: the printer will recognize a command for unidirectional printing. Change to Invalid if you do not wish the printer to recognize uni-directional printing commands. Microline 8480FB User's Guide · 49 Print Mode Choose the print quality and speed: LQ Courier [the default], LQ Roman, LQ Swiss, LQ Swiss Bold, LQ Orator, LQ Gothic, LQ Prestige, or Utility. Print Suppress The default is No. If your system uses the DC1 and DC3 codes for print suppress mode, change the setting to Yes. Prop. [. . . ] Close the cover. Microline 8480FB User's Guide Maintenance · 82 Control Codes In Sequence by ASCII Code ASCII Code BEL BS CAN CR DC1 DC2 DC2 DC3 DC4 DEL DEL ESC ­ n ESC !n ESC # ESC $ n1 n2 ESC % 4 n ESC % 8 n ESC % G ESC % H ESC % n ESC % T ESC & ESC & m n1 n2 d0 d1 d2 <DLL data> Function BELL BACKSPACE CANCEL CODE CARRIAGE RETURN RESET PRINT SUPPRESS MODE RESET COMPRESSED CHARACTER PITCH SET 10 CPI SET PRINT SUPPRESS Emulation(s) Diablo Epson LQ / IBM / Diablo Epson LQ / IBM Epson LQ / IBM / Diablo Epson LQ / IBM Epson LQ IBM Epson LQ RESET IMMEDIATE DOUBLE WIDTH Epson LQ / IBM CHARACTERS ONE CHARACTER DATA DELETE IGNORE SET/RESET UNDERLINING PRINT MODE SELECT SELECT INTERNATIONAL CHARACTER SET RESET 8 BIT MODE EXECUTE ABSOLUTE HORIZONTAL DOT POSITION FINE LINE FEED (n/360 INCH) SET n/360 INCH LINE SPACING SET ITALICS CHARACTER RESET ITALICS CHARACTERS DLL FONT SELECT SELECT EJECTS DIRECTION END BOLD/SHADOW PRINTING CHARACTER DEFINITION Epson LQ Diablo Epson LQ / IBM / Diablo Epson LQ / Diablo IBM Epson LQ / Diablo Epson LQ / Diablo IBM IBM IBM IBM Epson LQ / Diablo Epson LQ / IBM Diablo Epson LQ Microline 8480FB User's Guide Control Codes · 83 ASCII Code ESC ( t ESC * m n1 n2 <graphics data> ESC / n ESC : ESC : NUL n NUL ESC ?m n ESC @ ESC @ A n ESC @ E n ESC @ F n ESC @ H n ESC @ P n ESC @ T n ESC @ V n ESC @ W n ESC @ Z n ESC [ @ n1 n2 m1 m2 m3 m4 ESC [ \ 4 0 0 0 n1 n2 ESC [ g n1 n2 m data ESC [ n ESC [ T ESC \ n1 n2 ESC \ n1 n2 ESC ] ESC ] n ESC ^ Function ASSIGN CHARACTER TABLE Emulation(s) Epson LQ ENTER/EXIT BIT IMAGE GRAPHICS Epson LQ / IBM XL24 AGM / Diablo SELECT VERTICAL TAB CHANNEL SET 12 CPI COPIES ROM CG TO RAM CG REASSIGN ALTERNATE GRAPHICS CODES PRINTER INITIALIZATION Epson LQ / Diablo IBM Epson LQ / Diablo Epson LQ / Diablo Epson LQ SET LINE SPACING IN 1/120-INCH Diablo INCREMENTS SET EMULATION SET FONT START/END DOUBLE-HIGH PRINTING SET PRINT QUALITY (SPEED) SELECT BIN START/END SUPER/SUBSCRIPT START/END DOUBLE-WIDE PRINTING SET CHARACTER CELL SIZE SET/RESET DOUBLE HEIGHT CHARACTERS SET VERTICAL UNITS GRAPHICS RESOLUTION SET n/360 INCH FINE LINE SPACING SET CODE PAGE PRINT CONTINUOUSLY FROM ALL CHARACTERS CHART REVERSE LINE FEED FINE LINE FEED (n/360 INCH) PRINT ONE CHARACTER FROM ALL CHARACTERS CHART Microline 8480FB User's Guide Control Codes · 84 Diablo Diablo Diablo Diablo Diablo Diablo Diablo Diablo IBM IBM IBM XL24 Epson LQ IBM IBM IBM Epson LQ / Diablo IBM EXECUTE RELATIVE DOT POSITION Epson LQ / Diablo ASCII Code ESC _ n ESC { n ESC | 01H 01H 00H n ESC | 05H 01H 00H n ESC | 10H 02H 00H n1 n2 ESC | 12H 02H 00H 01H n ESC } NUL ESC + ESC < ESC = ESC = n1 n2 . . . <data> ESC > ESC 0 ESC 1 ESC 1 n ESC 2 ESC 2 ESC 3 n Function OVERSCORE SET/RESET SELECT EMULATION MODE SELECT EJECT DIRECTION PERFORM n/360-INCH LF SELECT HEAD GAP SELECT PAPER PATH SOFTWARE I-PRIME SELECT N/360 m LINE SPACING ONE LINE UNIDIRECTIONAL PRINTING SET BIT 7 CODE TO 0 LOAD DLL CHARACTER SET BIT 7 CODE TO 1 SET 1/8 INCH FIXED LINE SPACING SET 7/72 INCH FIXED LINE SPACING SELECT 7/72 LINE SPACING SET 1/6 INCH LINE SPACING START LINE SPACING SET n/180 INCH LINE SPACING Emulation(s) IBM Epson LQ / IBM / Diablo Epson LQ / Diablo Epson LQ / Diablo Epson LQ / Diablo Epson LQ / Diablo Epson LQ / IBM / Diablo Epson LQ Epson LQ / Diablo Epson LQ / Diablo IBM Epson LQ Epson LQ / IBM IBM Diablo Epson LQ / Diablo IBM Epson LQ / IBM PPR/IBM XL24/Diablo Epson LQ / Diablo IBM Epson LQ / Diablo IBM IBM Epson LQ / Diablo IBM ESC 4 ESC 4 ESC 5 ESC 5 n ESC 6 ESC 6 ESC 7 SET ITALIC CHARACTERS TOP OF FORM SET RESET ITALIC CHARACTERS SET/RESET AUTOMATIC LINEFEED SELECT CHARACTER SET II DISABLE UPPER ASCII CONTROL CODE SELECT CHARACTER SET I Microline 8480FB User's Guide Control Codes · 85 ASCII Code ESC 7 ESC 9 ESC a n ESC A n Function ENABLE UPPER ASCII CONTROL CODES SET LEFT MARGIN AUTO JUSTIFICATION SET N/60 INCH LINE SPACING Emulation(s) Epson LQ / Diablo Diablo Epson LQ / Diablo Epson LQ / IBM PPR/IBM XL24/Diablo ESC b n m1 m2 . . . [. . . ]