User manual OKI MPS420B

[. . . ] MPS420b User's Guide 59319301 my. okidata. com Copyright Information Copyright © 2009 by Oki Data. All Rights Reserved Document Information ___________________________________________________ MPS420b User's Guide P/N 59319301, Revision 1. 0 August, 2009 Disclaimer _________________________________________ ________________________ Every effort has been made to ensure that the information in this document is complete, accurate, and up-todate. The manufacturer assumes no responsibility for the results of errors beyond its control. The manufacturer also cannot guarantee that changes in software and equipment made by other manufacturers and referred to in this guide will not affect the applicability of the information in it. [. . . ] Press the up or down arrow button until System Configuration Menu appears. Press the up or down arrow button until Power Save Time appears. Press the up or down arrow button until the desired setting appears. An asterisk (*) will appear to confirm the selection. Press Online. 4. DISABLING POWER SAVE MODE 1. Press the up or down arrow button until Maintenance Menu appears. Press the up or down arrow button until Power Save appears. Press the up or down arrow button until Disable appears. An asterisk (*) will appear to confirm the selection. Press Online. 4. Operation > 38 2-Sided (Duplex) Printing The duplex unit adds the function of two-sided printing, using less paper and making large documents easier to handle. It also enables booklet printing, which uses even less paper. This printer has the option of Auto Duplex and Manual Duplex printing. Note The steps in the process relate to Windows XP PCL. Other operating system windows may appear slightly different, but the principles are the same. AUTO DUPLEX PRINTING This option provides automatic two-sided printing only for Letter, A4, Legal 13 and 14 and Custom paper sizes, using paper stocks from 16 - 28 lb. Note For Letter, Legal 13 and 14, Statement, Executive, A4, A5, A6, B5, and Custom paper sizes, see Manual Duplex Printing on page 42. Select File -> Print and click the Properties button. Select the input tray: Tray1 (or optional Tray2) or Multi Purpose Tray from the Source drop down. In the 2-Sided Printing drop down menu, select either Long Edge (Auto) or Short Edge (Auto) according to your printing preferences. Click OK. Note For further information, click the Duplex Help button. 2-Sided (Duplex) Printing > 39 MANUAL DUPLEX PRINTING USING THE PAPER TRAY (WINDOWS ONLY) Note Manual Duplex printing is available only for the Windows PCL Driver. You cannot use A6 paper size for printing from Tray 1 or optional Tray 2. To carry out 2-sided, or Manual Duplex Printing you must pass paper through the printer twice. Ensure that there is enough paper in the Paper Tray to carry out the print job. [. . . ] Printer's output is below rated speed. Much of the printing delays will be caused by your application. Sometimes purely text documents will print slowly depending on the selected fonts and how they are transferred to the printer. Number of lines per page in software is not equal to number of lines per page of printer. [. . . ]