User manual OLIVETTI D-COPIA 55

[. . . ] However, due to differences between individual PSTNs in the various countries, the approval does not unconditionally guarantee success operation of every PSTN termination point. If you encounter any problems, you should contact your supplier immediately. This product's conformity with quality requirements is certified by the Mark it bears, in accordance with the 1999/05/EC standard. Network compatibility declaration This product has been designed and developed to operate in the networks of all European Community countries, and in those of Switzerland and Norway. Full compatibility with the networks of individual countries will depend on specific national software parameters which can be set in the product. If you encounter problems with non EC PSTN networks, contact your national technical support service. [. . . ] The function selection screen will appear. 2. Press the cursor down key to select "BOOK>BOOK". The booklet + cover copy mode setting screen will appear. 38 FUNCTIONS 4. Press the cursor up or down key to specify the binding direction. Press the cursor down or up key to select whether to copy onto the front cover or not. When setting the original on the platen, go to the next step. When setting in the DF, go to step 13. 8. When copying onto the front cover, set the 2-page original that will be the front cover on the platen. When no copying is performed onto the front cover, set the 2-page original that will be the first page. After the original has been scanned, remove it. 10. Set the next 2-page original on the platen. The function selection screen will appear. 3. Press the cursor down or up key to select "INVERT". Make sure that "ENTER" has been selected and press the enter key. The message display will return to the "READY TO COPY. " screen. (15) Making mirror image copies [Mirror image mode] This mode can make mirror image copies. Press the Image key to light the indicator. The function selection screen will appear. 41 FUNCTIONS 3. Press the cursor down or up key to select "MIRROR". Make sure that "ENTER" has been selected and press the enter key. The message display will return to the "READY TO COPY. " screen. (16) Printing page numbers on copies [Print page numbers] When copies are made from multiple originals, it is possible to assign page numbers in numerical order from the first of original. There are three styles of print to choose from: "-1-", "P. 1" and "1/5". Page numbers will be printed in the bottom center of the page. [. . . ] Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 585 mm (W)x 600 mm(D) x 745 mm(H) Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Approx. 81 kg Noise Emission . . . . . . . . . . . . . . . . . . . . . . . . . . . . . <70 dB(A) Required space . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 735 mm (W)x 600 mm(D) Optional equipment . . . . . . . . . . . . . . . . . . . . . . DF (Document feeder), paper feed unit (drawer-type/large-capacity deck-type), finisher, duplex unit, job separator, mail box, key counter, fax board, printer board, network board (Specifications are subject to change without notice. ) 82 ABOUT 23 PPM COPIER This chapter covers matters specifically for 23 ppm copier. Please refer this chapter, as well as other chapters in the instruction handbook, if you purchased a 23 ppm copier. q Multi-Bypass The multi-bypass described on page 8 and page 12 (/ on page 8) is an optional equipment. [. . . ]