User manual OLIVETTI FAXLAB 275 LIDL

[. . . ] User Manual Ink Jet Fax Fax-Lab 275 PUBLISHED BY: Olivetti I- Jet S. p. A. Località Le Vieux 11020 ARNAD (Italy) Copyright © 2004, Olivetti All rights reserved Editors: Olivetti Tecnost, S. p. A. Via Jervis, 77 - 10015 IVREA (Italy) The manufacturer reserves the right to make any changes to the machine described in this manual, at any time, and without prior warning. This machine has been approved, under the terms of Council Decision 98/482/EC, for Europe-wide connection as a single terminal to an analogue Public Switched Telephone System (PSTN) system. [. . . ] To select one of the options, press the key: / 4. To confirm the selection, press the key: Having printed the report, the fax machine automatically returns to its initial standby status. If you chose PRINT INSTALL. or PRINT:BLACK LIST, when the fax machine has finished printing, it returns automatically to the standby mode. If you have chosen MENU EXIT, press the fax machine to the stand-by mode. key to return the PRINTING CONFIGURATION PARAMETERS AND DATA RELATING TO ONE-TOUCH DIALLING AND SPEED DIALLING 1. Press the key until the display shows: FAX SET-UP 2. Press the key: Note If you have chosen PRINT OUT:EXIT, press the the fax machine to the stand-by mode. key to return The display shows: LISTS At any time, you can print complete lists of the installation and setup parameters and print the data saved in the one-touch dialling keys and speed dialling codes. By printing out the lists of installation and setup parameters, you will obtain an up to date report of the default values and those that you have set to adapt it to your operating requirements. DATE AND TIME 3. Press the key until the display shows: PRINT OUT SET-UP 4. Press the key: The display shows: PRINT SETTINGS 5. To view the other available options: PRINT:ONE TOUCH, PRINT:SPEED DIAL and PRINT OUT:EXIT, press the key: / 6. To confirm the selection, press the key: Having printed the report, the fax machine automatically returns to its initial standby status. PRINTING NUMBERS INSTALLATION PARAMETERS AND BLACKLISTED 1. Press the key until the display shows: INSTALLATION 2. Press the key: The display shows: Note If you have chosen PRINT OUT:EXIT, press the the fax machine to the stand-by mode. Press the key until the display shows: PRINT LIST 4. Press the key: The display shows: PRINT INSTALL. 5. To view the other available options: PRINT:BLACK LIST and MENU EXIT, press the key: / 6. To confirm the selection, press the key: 23 MAKING A CALL When you engage the line by lifting the telephone handset, you may use all the telephone functions available on ordinary telephones sold on the market. These also include the R function (REGISTER RECALL, activated by pressing the key) which provides access to the special services made available by the company that manages the telephone network. You can also use the following functions: Call the correspondent using the fast dialling procedures set, see Telephoning with one-touch dialling and Telephoning with speed dialling. (HOLD) Momentarily hold a telephone call by pressing the key. [. . . ] Memo store 2 outgoing messages ANNOUNCE ONLY function TOLL SAVER function Transfer message Fast access from console and remote location Access code Message recording Retention of messages if power failure. Telephone network . . . . . Public/private Compatibility . . . . . . . . . . . . . . . 14400-12000-9600-7200-48002400 Data compression method . . . . . . . . . MH, MR, MMR ELECTRICAL CONNECTION SPECIFICATIONS Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]