User manual OLIVETTI LOGOS 50 1

[. . . ] 1-3 What is an ENERGY STAR® Product?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 Safety information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4 Warning and precaution symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4 Meaning of symbols. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] % When directly entering the fax number, use the keypad to type in the number. % A document can be sent to multiple destinations at the same time (Broadcast transmission). For details on sending a document to multiple destinations, refer to page 5-10 of this manual. % If necessary, press [Scan Settings], [Original Settings] or [Communication Settings], and specify the desired settings. For details, refer to chapter 5 of the [User's Guide Network Scan/Fax/Network Fax Operations]. 3 Position the document to be faxed. % To scan a document that cannot be loaded into the ADF (a thick document or a document on thin paper), position it on the original glass. d-Color MF360/280/220 2-11 2 Basic fax operation 2. 3 % Insert the original in the ADF with the side to be sent facing up. % To check the destinations and the settings specified for the functions, press [Check Job Settings]. For details, refer to chapter 3 of the [User's Guide Network Scan/Fax/Network Fax Operations]. % Press the [Proof Copy] key before pressing the [Start] key to display the preview image of the currently specified settings on the touch panel. 4 Press the [Start] key. % To scan multiple originals using the original glass, select [Separate Scan]. After scanning 1st page of the original, load the 2nd page and press [Start] again. Repeat this process until all the pages have been scanned. After the last page has been scanned, press [Finish], and then press the [Start] key. d Reference To stop the transmission after the [Start] key was pressed, press [Job List], then [Job Details], and then delete the job to be stopped. For details, refer to chapter 3 of the [User's Guide Network Scan/Fax/Network Fax Operations]. 2-12 d-Color MF360/280/220 2. 3 Basic fax operation 2 1 3 2 d-Color MF360/280/220 2-13 2 2. 4 Basic scan operation Basic scan operation 2. 4 This section contains information on the general operation for sending scan data. Scan data transmissions A document scanned with this machine can be sent as a data file. There are following transmission methods. The following procedure describes how to register public, personal and group user boxes. Box operations These functions allow document data to be saved on the hard disk installed in the machine and retrieved when necessary. In addition to data scanned with this machine, data created on the computer and data sent from another multifunctional peripheral can be saved in this user box. Box The following user boxes can be registered. Types of user boxes Public user boxes Personal user boxes Group user boxes Bulletin board user boxes Description This shared user box can be accessed by anyone. Access can be controlled if a password is specified. This user box for an individual can only be accessed by users that have logged on when user authentication settings have been applied. This user box can only be accessed by users who belong to the account (group) and have logged on when account track settings have been applied. This user box can be used to share documents through the fax line, even with recipients not on the network. (The receiving machine must be compatible with F-codes. ) In order to use these user box operations, the optional fax kit must be installed. For details, refer to chapter 7 of the [User's Guide Network Scan/Fax/Network Fax Operations]. This user box is required for using this machine as a relay station. (The relay transmission function uses F-codes. ) In order to use these user box operations, optional fax kit must be installed. For details, refer to chapter 7 of the [User's Guide Network Scan/Fax/Network Fax Operations]. [. . . ] DIC may terminate this License Agreement without prior notice to you if you fail to comply with any of the terms and conditions of this License Agreement (either directly or through your employees or agents), retroactive to the time of such failure to comply. In such event, you must immediately stop using the Profile and destroy all copies of the Profile in your possession or control. All provisions in this License Agreement relating to warranty disclaimers (Section 5) and the limitation of liability (Section 6) shall survive any termination of this License Agreement. You may install and use the Profile on a single desktop computer; provided, however, that, notwithstanding anything contrary contained herein, you may not use the Profile on any network system or share, install or use the Profile concurrently on different computers, or electronically transfer the Profile from one computer to another or over a network. [. . . ]