User manual OLIVETTI OFX 180

[. . . ] OFX 180 INSTRUCTIONS PUBLISHED BY: Olivetti I-Jet S. p. A. Località Le Vieux 11020 ARNAD (Italy) Editors: Olivetti Tecnost, S. p. A. Direzione @ Home/Office Via Jervis, 77 - 10015 IVREA (Italy) Copyright © 2003, Olivetti All rights reserved The manufacturer reserves the right to make any changes to the machine described in this manual, at any time, and without prior warning. This machine has been approved, under the terms of Council Decision 98/482/EC, for Europe-wide connection as a single terminal to an analogue Public Switched Telephone System (PSTN) system. [. . . ] Until the display shows: AUTOMATIC RX MEMORY TX MANUAL RX When the telephone rings, lift the handset to engage the line. The display shows: note The fax machine enables you to set one broadcast transmission from the memory at a time. TEL CALL As soon as you hear the fax machine signal or if the correspondent asks you to receive a document. The display shows: note The fax machine automatically deletes all the transmissions completed successfully from memory. CONNECTING Hang up. The fax machine starts to receive and the display shows some information about the reception in progress, including the your correspondent's fax number or, if programmed, his name. Once the document has been received, the display shows the message "RX COMPLETED" for a few seconds and then the stand-by mode. Automatic reception, for all occasions in which you are out but want to receive documents anyway. This is the mode originally set on your fax machine; should it not be set in this way, press the key until the display shows "AUTOMATIC RX". The document is received as in manual reception mode. Automatic reception with recognition of the type of call. In this reception mode, after a given number of rings (default setting: 2 rings), the fax machine connects to the telephone line and is capable of recognizing whether the incoming call is a fax call or a telephone call. Until the display shows: TO CHANGE/REPEAT/DELETE A TRANSMISSION FROM THE MEMORY THAT IS ALREADY SET The display shows: MEMORY TX The display shows: · ALREADY ENTERED The display shows: PRINT SETTING? / Press |/} to view the other available options: "CHANGE PARAM. ?" or "CANCEL SETTING?". ­ To print the memory transmission parameters only. When it has finished printing, the fax machine returns automatically to its initial status. · PHONE/FAX RX 10 The action taken by the fax machine in this reception mode depends on who is calling: - If the caller is another fax machine, after two rings your fax machine automatically prepares to receive a document. - If the caller is a telephone, after two rings, the fax machine emits an acoustic signal for about 20 seconds and the display shows "LIFT HANDSET". If you do not lift the receiver within 20 seconds, the fax machine automatically prepares to receive a document. If you lift the receiver before the fax machine connects to the telephone line and you hear the dialling tone, press the key and then hang up. / If there are any incorrect numbers, position the cursor on the incorrect number using the |/} keys and overwrite it with the correct number. If your fax machine is connected to a private line, access the public line by pressing the key before dialling the number. A letter "E" (external) appears on the display. EXTERNAL To confirm the setting. The display shows: 1:NAME If a name has already been saved, the display will show it. Enter the correspondent's name (max. 16 characters) as you did for your name (see "All that is missing now is your name and fax number", section "Installation"). If there are any incorrect characters, position the cursor on the incorrect character using the |/} keys and overwrite it with the correct character. [. . . ] MH, MR, MMR Printing system . . . . . . . . . . . . . Printing on plain paper, bubble ink jet printer Max. printing width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208 mm Printing paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]