User manual OLIVETTI PRIVACY MINI

[. . . ] This Operation Guide is intended to help you operate the machine correctly, perform routine maintenance and take a simple troubleshooting action as necessary, so that you can always use the machine in good condition. Please read this Operation Guide before you start using the machine, and keep it close to the machine for easy reference. We recommend the use of our own brand supplies. We will not be liable for any damage caused by the use of third party supplies in this machine. [. . . ] Each application is activated and the initial screen appears. Use the procedure below to select the default startup screen. 1 2 3 Press the System Menu key. Press [Common Settings] and then [Change] of Default Screen. Select the screen to be displayed as the default screen. 8 NOTE: The application names appear if the applications are installed and officially licensed on. 4 Press [OK]. Sound Set options for buzzer sound during the machine operations. The table below lists the buzzer types and their settings and details. Item Volume Key Confirmation Job Finish Ready Warning Value 0 (Mute), 1 (Minimum) to 5 (Maximum) Off, On Off, On Off, On Off, On Description Set the buzzer volume level. Emit a sound when the control panel and touch panel keys are pressed. Emit a sound when a print job is normally completed. Emit a sound when the warm-up is completed. Emit a sound when errors occur. 8-3 Default Setting (System Menu) Use the procedure below to set the sound options. 1 2 3 4 Press the System Menu key. Press [Common Settings], [Next] of Sound and then [Next] of Buzzer. Press [Change] of Volume, Key Confirmation, Job Finish, Ready, or Warning. Available options are as follows: Inch models: Ledger, Legal, Letter, Letter-R, Statement-R, 8. 5×13. 5", Oficio II Metric models: A3, B4, A4, A4-R, B5, B5-R, A5-R, Folio Select a standard size except that selected in Standard Sizes 1. Inch models: A3, B4, A4, A4-R, A5-R, B5, B5-R, Folio, 8K, 16K, 16K-R Metric models: Ledger, Legal, Letter, Letter-R, Statement-R, 8. 5×13. 5", Oficio II, 8K, 16K, 16K-R Plain (105 g/m2 or less), Rough, Vellum (64 g/m2 or less), Recycled, Preprint**, Bond*, Color, Prepunched**, Letterhead**, Thick (106 g/m2 and more), High Quality, Custom 1-8* 8 Media Type * ** To change to a media type other than Plain, refer to Paper Weight on page 8-7. When the paper weight settings shown below are selected, the media indicated for each setting cannot be selected. · Custom 1 to 8: Heavy3 or Extra Heavy To print on preprinted or prepunched paper or on letterhead, refer to Special Paper Action on page 8-10. 8-5 Default Setting (System Menu) Use the procedure below to select the paper size and media type for each cassette. 1 2 3 Press the System Menu key. Press [Common Settings], [Next] of Original / Paper Settings, [Next] of Cassette Setting, [Next] of Cassette 1 to Cassette 4, on which you want to register the size, and then [Change] of Paper Size. To detect paper size automatically, press [Auto] and select Metric or Inch for Paper Size. To select paper size, press [Standard Sizes 1] or [Standard Sizes 2] for Paper Size. 4 5 Press [OK]. Press [Change] of Media Type to select media type and press [OK]. Paper Size and Media Type Setup for Multi Purpose Tray Select size and media type for multi purpose tray. Set up frequently-used size and media type before use. The available paper sizes and media types are shown in the table below. Item Paper Size Auto Standard Sizes 1 Description Automatically detect paper size. [. . . ] SMTP (Simple Mail Transfer Protocol) A protocol for E-mail transmission over the Internet or an intranet. It is used for transferring mail between mail servers as well as for sending mail from clients to their servers. Status Page The page lists machine conditions, such as the memory capacity, total number of prints and scans, and paper source settings. Subnet Mask The subnet mask is a way of augmenting the network address section of an IP address. [. . . ]