User manual OLYMPUS Μ-7030

[. . . ] DIGITAL CAMERA STYLUS-7030 / Instruction Manual -7030 Thank you for purchasing an Olympus digital camera. Before you start to use your new camera, please read these instructions carefully to enjoy optimum performance and a longer service life. Keep this manual in a safe place for future reference. The application software and instruction manual PDF file are stored on the internal memory of the camera. [. . . ] The time in the travel destination time zone (the time zone selected for y in submenu 2). -- -- Select the home time zone (x). Select the travel destination time zone (y). In areas where daylight saving time is in effect, use FG to turn daylight saving time ([SUMMER]) on. When you select a time zone, the camera automatically calculates the time difference between the selected zone and the home time zone (x) to display the time in the travel destination time zone (y). Selecting a video signal system to match your TV [VIDEO OUT] t (Settings 3) VIDEO OUT The TV video signal system varies depending on the countries and regions. Before viewing camera images on your TV, select the video output according to your TV's video signal type. Submenu 2 NTSC PAL Application Connecting the camera to a TV in North America, Taiwan, Korea, Japan, and so on. Connecting the camera to a TV in European countries, China, and so on. The factory default settings differ according to the region where the camera is sold. To play back camera images on a TV 1 Use the camera to select the same video signal system as the one of connected TV ([NTSC]/[PAL]). 2 Connect the TV and camera. Multi-connector Connect to the TV video input jack (yellow) and audio input jack (white). AV cable (supplied) EN 45 3 Turn on the TV, and change "INPUT" to "VIDEO (an input jack connected to the camera). " For details on changing the input source of the TV, refer to the TV's instruction manual. 4 Press the q button, and use HI to select the image for playback. Depending on the TV's settings, the displayed images and information may become cropped. Saving battery power between shots [POWER SAVE] t (Settings 3) Submenu 2 OFF POWER SAVE Application Cancels [POWER SAVE]. When the camera is not being used for approx. 10 seconds, the monitor automatically turns off to save battery power. ON To resume standby mode Press any button. 46 EN Printing Direct printing (PictBridge*1) By connecting the camera to a PictBridgecompatible printer, you can print images directly without using a computer. To find out if your printer supports PictBridge, refer to the printer's instruction manual. *1 2 Turn on the printer, and then connect the printer and camera. I button Multi-connector PictBridge is a standard for connecting digital cameras and printers of different makers and printing out pictures directly. The printing modes, paper sizes, and other parameters that can be set with the camera vary depending on the printer that is used. For details, refer to the printer's instruction manual. For details on the available paper types, loading paper, and installing ink cassettes, refer to the printer's instruction manual. USB cable (supplied) Printing images at the printer's standard settings [EASY PRINT] In the [SETUP] menu, set [USB CONNECTION] to [AUTO] or [PRINT]. 4) EASYPRINT START CUSTOM PRINT OK 1 Display the image to be printed on the monitor. "Viewing images" (p. 18) Printing can also be started when the camera is turned off. After performing Step 2, use FG to select [EASY PRINT], press the A button. Use HI to select an image, and press the A button. 3 4 Press I to start printing. To print another image, use HI to select an image, and press the A button. To exit printing After a selected image is displayed on the screen, disconnect the USB cable from the camera and printer. EXIT PRINT OK EN 47 Changing the printer's settings for printing [CUSTOM PRINT] 5 1 2 3 Use FG to select the [BORDERLESS] or [PICS/SHEET] settings, and press the A button. Submenu 4 Application The image is printed with a border around it ([OFF]). The image is printed to fill the entire paper ([ON]). The number of images per sheet ([PICS/SHEET]) is selectable only when [MULTI PRINT] is selected in Step 3. Follow Steps 1 and 2 for [EASY PRINT] (p. Use FG to select the print mode, and press the A button. PRINT MODE SELECT PRINT ALL PRINT MULTI PRINT ALL INDEX PRINT ORDER EXIT MENU SET OK OFF/ON*1 (The number of images per sheet varies depending on the printer. ) *1 The available settings for [BORDERLESS] vary depending on the printer. If [STANDARD] is selected in Steps 4 and 5, the image is printed at the printer's standard settings. 4/30 Submenu 2 PRINT ALL PRINT MULTI PRINT ALL INDEX PRINT ORDER*1 *1 Application This prints the image selected in Step 6. This prints all images stored in the internal memory or card. This prints one image in a multiple layout format. [. . . ] When this Warranty Certificate is not returned with the product. When any alterations whatsoever are made to the Warranty Certificate regarding the year, month and date of purchase, the customer's name, the dealer's name, and the serial number. When proof of purchase is not presented with this Warranty Certificate. 4 This Warranty applies to the product only; the Warranty does not apply to any other accessory equipment, such as the case, strap, lens cap and batteries. [. . . ]