User manual OLYMPUS BAGUE ALLONGE ZUIKO DIGITAL EX-25

[. . . ] For more details on the functions described here, refer to the Reference Manual on the provided CD-ROM. This section provides important information about using this digital camera. Before using the camera, please be sure to read the following. The information contained in this manual may be subject to change without notice. [. . . ] When the monitor is turned by pressing the monitor button, the information displays on the left are shown on the monitor. Of images that can be shot Battery status Shows the approximate number of images you can shoot. ) The remaining battery power is too low. Shooting is possible when the batteries are low, but battery power could run out while the image is being processed. Shows the quality of the next image to be shot. The default setting is the Single-Frame mode, which is not displayed on the monitor. *1 When you change the setting, it remains effective after the camera is turned off. *2 When you change the setting, it returns to the factory setting when the camera is turned off. Shows the Digital Zoom mode, with "T" indicating telephoto zoom and "W" indicating wide-angle shooting. the default setting is no digital zooming. Shows the use of the white balance control feature which adjusts the color tone of the image. the digital zoom is also available to magnify an image up to 2X. If you use both functions, you can shoot an image zoomed by up to 6X. To use the digital zoom, you need to set the Digital Zoom to "ON" using the setting menu display. To zoom in the image (up to 2X, or up to 6X with the optical zoom), and slide to to zoom out the image. Digital Zoom Appears only when using digital zooming (and does not appear when using only optical zooming). The zoom bar slides toward T when zoomingin, and toward W when zooming-out. It is recommended to use the Macro mode when shooting a subject at a distance of less than 0. ¼ The monitor turns on so you can compose close-up images in the monitor. Can also be displayed by pressing the ( ) arrow pad key when the lens barrier is open. pressing the arrow pad key switches the Macro mode to On or Off. The setting menu disappears after a moment when no operation is performed. [. . . ] Continued> Pressing the arrow pad key while 4 (or 9) images are displayed advances the selected image (with the green frame) to the next image. When the last displayed image in the index is selected, pressing the arrow pad key brings up the next index. Similarly, pressing the arrow pad key moves the green frame to the previous image. Pressing when the first image in the index is selected brings up the previous index. [. . . ]