User manual OLYMPUS CAMEDIA C-40 ZOOM QUICK START GUIDE

[. . . ] If it is inserted incorrectly, it may become jammed. If the card is not inserted fully, the card cover will not close. Closing the card cover forcibly will damage the card cover. Card access lamp 3 4 Ejecting the card Grasp the card and pull in straight out. on the subject, 3 To focusslowly and gently. press the shutter button halfway, When the subject is in focus, the green lamp lights up. Close the cover tightly. Green lamp 2 Thread the rest of the strap through the loop that has already gone through the eyelet. [. . . ] The card access lamp blinks and the camera starts writing the movie to the card. If you use all the displayed seconds remaining, shooting finishes automatically and the camera starts writing the movie to the card. screen returns to the beginning of the movie. If is pressed again when the movie playback is finished, the MOVIE PLAYBACK screen appears. To exit the movie playback mode, press Ññ to select EXIT, then press . 6 To return to the shooting mode, press the shutter button halfway. http://www. olympus. com/ Printed in Japan 1AG6P1P1131 - VT317101 Buttons and Dial Lens barrier Turns the camera on/off. Menu functions Moving around the Menu screen Zoom lever Shooting Playback : Zooms in/out. : Displays multiple pictures at the same time (Index-display), or enlarges pictures (close-up playback). Print reserve: Sets trimming size. 1 Press Note: The Top menu and available menu functions vary depending on the mode. (See the Reference Manual for more details. ) 2 Top menu (Mode dial: "P") 3 If you select MODE MENU in step 2 4 to enter each menu CAM PIC SET CARD PIC CAMERA OFF DRIVE ISO P/A/S/M AUTO MODE MENU to select to select WB The top menu functions can be changed to your liking in the "P", "A/S/M" and modes (SHORT CUT setting). Brings up CAMERA menu Brings up PICTURE menu Brings up CARD menu Brings up SETUP menu Shutter button Focuses (half press) or shoots (fully press). CARD SET Menu functions during shooting CAMERA Sets self-timer shooting or remote control shooting. DRIVE ISO P/A/S/M Changes the drive modes, or sets autobracketing. (AUTO/100/200/400) When the mode dial is set to A/S/M: Exposure mode can be selected from A (Aperture priority auto), S (Shutter priority auto), or M (Manual mode). When the mode dial is set to : Exposure mode can be selected from P, A, S or M. Adjusts the flash for slow shutter speeds. ( SLOW2) SLOW1/ SLOW/ Adjusts the brightness of the monitor. Sets the date/time. m/ft SHORT CUT Sets the measurement units (m/ft) during manual focus. Selects items for the shortcut menu on the top menu screen. Macro/Spot button Viewfinder During shooting, compose your subject by looking through the viewfinder. Shooting : Activates macro mode or metering mode. Macro (close-up) shooting Wide: 0. 1 m - 0. 8 m (0. 3 ft - 2. 6 ft)/Tele: 0. 25 m - 0. 8 m (0. 8 ft - 2. 6 ft) Spot metering Meters within the AF target on the viewfinder. Digital ESP meters the center of the subject and the area around it. ) During macro mode shooting, spot metering is activated. : Prevents pictures from being erased accidentally. Menu functions during playback (still pictures) Runs through all saved pictures one after another (slide-show). SLOW NOISE REDUCTION DIGITAL ZOOM (still pictures) Stores printing information required for DPOF printers. Playback Reduces the electrical noise on images during long exposures. Combining the digital zoom with the 2. 8x optical zoom, makes possible zoom magnification up to approx. 7x (equivalent to 35 mm 245 mm on a 35 mm camera). Keeps the image in focus at all times without having to press the shutter button halfway. 4 seconds of sound recording to be attached to a picture. [. . . ] Sets playback sound volume, as well as the volume of the sound selected in PW ON SETUP and PW OFF SETUP. Sets the picture displayed on the monitor and the sound output when the power is turned on. Sets the picture displayed on the monitor and the sound output when the power is turned off. Registers a stored picture so that you can select it in PW ON SETUP and/or PW OFF SETUP. [. . . ]