User manual OLYMPUS CAMEDIA C-3000 PART2

[. . . ] SELFTIMER/REMOTE CONTROL Use a tripod to hold the camera securely. OF P OW ER 34 1 P F /M OD E A/S /M 1 2 2 P F2. 8 1/800 +2. 0 DRIVE WB ISO SLOW AF BKT [1/3] 1. 0 Control panel 76 IA D L Set the Mode dial to P or A/S/M. Press the Menu button to display the Menu. 3 Press the top/bottom arrows on the Jog dial to select DRIVE. 4 Press the right arrow on the Jog dial, then press the top/bottom arrows to select . · appears on the control panel. 3 5 5 Press the left arrow on the Jog dial to confirm the setting. 6 Press the OK button to save the setting and cancel the Menu. · Pictures can also be taken without pressing the OK button. 78/79) 6 Note: · Unless OFF is selected in All Reset, the setting will be canceled when the power is turned off. [. . . ] · The lower the compression rate, the better the image quality when the picture is enlarged. Also, compared to SQ1, SQ2 and HQ, the recording time for SHQ and TIFF is longer. · The number of storable pictures varies according to the recording mode. TIFF requires more room in the card than other modes. 42) 106 A/S/M MODE You can select Aperture priority mode, Shutter priority mode or Manual mode for A/S/M on the Mode dial. OF PO ER 345 1 P F W /M OD E A/S /M 1 2 3 6 2 CARD SETUP MODE SETUP A/S/M MODE P F2. 8 1/800 +2. 0 A S M [3/3] Note: · Unless OFF is selected in All Reset, the setting will be canceled when the power is turned off. 194) IA D L Set the Mode dial to P or A/S/M. Press the Menu button to display the Menu. Press the top/bottom arrows on the Jog dial to select A/S/M MODE. Press the right arrow on the Jog dial, then press the top/bottom arrows to select A (Aperture priority), S (Shutter priority) or M (Manual). · Refer to the respective page for each function. Press the left arrow on the Jog dial to confirm the setting. If you take a picture without pressing the OK button, the setting will be valid until the Menu is canceled. · Press the OK button to save the setting and cancel the Menu. 4 5 6 107 DISPLAYING RECORDED PICTURES You can display the pictures you have taken on the LCD monitor. OF 1 OD E D IAL A/S/M 1 F OW ER/M Recording mode Battery check Protect Sound record Random print 10 Set the Mode dial to . · When the power is turned on in the Display mode, a card check is executed automatically. When a card is not inserted, or there is some trouble with the card, the card error indicator blinks on the control panel. · When a card in a different format is inserted, the camera automatically enters the Card format mode. 122) The last picture taken is displayed. · When there are no pictures stored in the card, NO PICTURE will appear. · The last picture taken, Frame number, Recording mode, and Battery check indicator will appear on the LCD monitor for 5 seconds. The Date, Print and Protect indicator will also appear if they are set. · If the battery power is low, the Battery check indicator will light in red. · will appear for a movie picture, which can be displayed as a movie. [. . . ] · WB appears on the control panel when a setting other than AUTO is selected. 5 6 5 Press the left arrow on the Jog dial to confirm the setting. 6 If you record a movie without pressing the OK button, the setting will be valid until the Menu is canceled. · Press the OK button to save the setting and cancel the Menu. Note: · Select AUTO in normal situations. · The Manual white balance may not work under special lighting. · Unless OFF is selected in All Reset, the setting will be canceled and reset to auto when the power is turned off. [. . . ]