User manual OLYMPUS D-1000 DIGITAL VOICE RECORDER D1000 OPERATION MANUAL

[. . . ] For the latest information on the product names, model numbers, etc. , please consult your local Olympus representative. The information contained in this manual has been compiled by taking all possible measures to ensure its accuracy. However, if you find any errors or incomplete information, please contact your local Olympus representative. It is prohibited by copyright laws to duplicate in part or in whole the information contained in this manual, except for personal use. [. . . ] At 1X, the image taken by the camera is equivalent to an image taken with a compact camera (35 mm film) using a 36 mm lens, but digital zoom allows you to shoot a zoomed-in image equivalent to that shot using a 72 mm lens. OK/menu button Monitor button Operating Procedure Check that the lens barrier is open. 1. [The monitor turns on and starts to show the image to be shot. The zoomed image cannot be confirmed in the viewfinder. Be sure to observe the monitor during shooting with zooming. Arrow pad 2. [The image can be magnified (toward the "T") in steps up to 2X. [The image is zoomed out (toward the "W") to 1X. [The monitor turns off and digital zoom is canceled. 3. Press the The image will be of a lower resolution and will appear grainy when the digital zoom is used. 60 ADVANCED SHOOTING FEATURES Shooting a Close Subject (Macro Shooting) It is recommended to use the Macro mode when shooting a subject at a distance of less than 0. 5 meter/1. 6 feet. OK/menu button Operating Procedure Check that the lens barrier is open. 1 /3 AUTO OFF OFF OFF SELECT END OK 1. [The monitor shows the shooting mode menu 1/3. or Shooting mode menu 1/3 screen Arrow pad 3. Select "ON" by pressing the 1 /3 AUTO OFF OFF OFF SELECT END OK or arrow pad key. 4. [The monitor turns on so you can compose close-up images in the monitor. When you have found your best shot, you can also erase the rest of the images. (Page 46) OK/menu button Operating Procedure Check that the lens barrier is open. 1 /3 AUTO OFF OFF OFF SELECT END OK 1. [The monitor shows the shooting mode menu 1/3. Shooting mode menu 1/3 screen Arrow pad 2. Select 1 /3 AUTO OFF OFF OFF SELECT END OK by pressing the arrow pad key. or 3. Select "ON" by pressing the arrow pad key. or 4. Press the Shooting mode menu 1/3 screen Continuous shooting mode OK/menu button. [The Continuous Shooting mode is engaged and is displayed on the monitor. 5. Press and hold the shutter button. [Multiple images will be shot in rapid succession for as long as your keep the button pressed. 6. Close the lens barrier and open it again to restore the default SingleFrame Shooting mode. ADVANCED SHOOTING FEATURES 63 Flash is not available in the Continuous Shooting mode. Even when the flash mode is set to Auto, it is switched to Flash Off. To prevent camera shake, the maximum shutter speed is limited to 1/30 second. [. . . ] It also displays the camera menus for use in setting operations. Adjustment of the brightness of the monitor. 52 Monitor adjustment N Night Scene This flash mode fires the flash and then allows the shutter to remain open for a long duration. It allows you to shoot both the subject in the foreground and expose the night scene in the background. [. . . ]