User manual OLYMPUS FE-320 QUICK START GUIDE

[. . . ] DIGITAL CAMERA FE-320/X-835/C-540 FE-340/X-855/C-560 Instruction Manual Quick Start Guide Get started using your camera right away. Button operations Menu operations Printing pictures Using OLYMPUS Master Getting to know your camera better Appendix ( Thank you for purchasing an Olympus digital camera. Before you start to use your new camera, please read these instructions carefully to enjoy optimum performance and a longer service life. Keep this manual in a safe place for future reference. ( We recommend that you take test shots to get accustomed to your camera before taking important photographs. [. . . ] When taking pictures in low light without the flash, set the flash mode to [$] (flash off). g "Y# button Flash shooting" (P. 15) Select a higher value for [ISO] g "ISO Changing the ISO sensitivity" (P. 23) EN 43 The picture is too grainy There are several factors that can cause the picture to appear grainy. Using the digital zoom to take close-up pictures · With the digital zoom, part of the image is cropped and enlarged. The greater the magnification, the grainier the picture appears. Increasing the ISO sensitivity · When you increase the [ISO] setting, "noise", which appears as spots of unwanted color or unevenness in the color, can be introduced and give the picture a grainy appearance. This camera is equipped with a function to allow shooting at high sensitivity while suppressing noise; however, increasing the ISO sensitivity can result in some noise, depending on the shooting conditions. g "ISO Changing the ISO sensitivity" (P. 23) Taking pictures with the correct color · The reason why there are sometimes differences between the actual colors and the colors recorded in a picture is related to the light source illuminating the subject. [WB] is the function that helps the camera determine the true colors. Normally, the [AUTO] setting provides the optimal white balance, but depending on the subject, results may be better if you manually adjust the [WB] setting. g "WB Adjusting the color of a picture" (P. 22) · When the subject is in the shade on a sunny day · When the subject is illuminated by both natural light and indoor lighting, such as when near a window · When there is no white in the center of the frame Getting to know your camera better Taking pictures of a white beach or snow scene · Often, bright subjects (such as snow) turn out darker than their natural colors. Adjusting OF toward [+] makes the subject closer to their real shades. Conversely, when you are shooting dark subjects, it can be effective to adjust toward [­]. Sometimes, using the flash may not produce the brightness (exposure) that was intended. g "OF/< button Changing picture brightness (Exposure compensation)/Printing pictures" (P. 15) Taking pictures of a subject against backlight · Set the flash to [#] (fill-in) to activate fill-in-flash. You can shoot a subject against backlight without the face of the subject appearing dark. [#] is effective not only for shooting against backlight, but also for shooting under fluorescent and other artificial lightening. g "Y# button Flash shooting" (P. 15) · Selecting a [+] exposure value with OF is useful in shooting a subject against backlight. g "OF/< button Changing picture brightness (Exposure compensation)/Printing pictures" (P. 15) · When [AF MODE] is set to [FACE DETECT], the camera determines the exposure by metering a face and the face in the picture taken will appear brighter even in backlight conditions. [. . . ] 26 S f (Scene) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IMAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Selecting a language W . . . . . . . . . . . . . . . . . . . . . . . 29 SELF PORTRAIT R. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]