User manual OLYMPUS FE-4040
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual OLYMPUS FE-4040. We hope that this OLYMPUS FE-4040 user guide will be useful to you.
Lastmanuals help download the user guide OLYMPUS FE-4040.
Manual abstract: user guide OLYMPUS FE-4040
Detailed instructions for use are in the User's Guide.
[. . . ] DIGITAL CAMERA
Thank you for purchasing an Olympus digital camera. Before you start to use your new camera, please read these instructions carefully to enjoy optimum performance and a longer service life. We recommend that you take test shots to get accustomed to your camera before taking important photographs. In the interest of continually improving our products, Olympus reserves the right to update or modify information contained in this manual. [. . . ] 11)
This condition may occur when the camera is
pointed at an extremely bright subject under a clear sky and so on. The lines do not appear, however, in the final image.
Battery performance may have been reduced
temporarily due to low temperature. Take the batteries out of the camera, and warm them by putting them in your pocket for a while.
"The light is caught in the picture".
Shooting with flash in dark situations results in
an image with many flash reflections on dust in the air.
"An error message is displayed".
"Error message" (p. 43)
Date and time function
"Date and time settings return to the default setting".
If the batteries are removed and left out of the
camera for about a day*2, the date and time settings return to the default setting, and must be reset. *2 The time until the date and time settings return to the default setting varies depending on how long the batteries have been loaded. 12)
"No picture is taken when the shutter button is pressed".
Cancel sleep mode.
To save battery power, the camera automatically goes into sleep mode and the monitor turns off if there is no operation for 3 minutes when the camera is turned on. No picture is taken even if the shutter button is fully pressed in this mode. Operate the zoom buttons or other buttons to restore the camera from sleep mode before taking a picture. If the camera is left for another 12 minutes, it automatically turns off. Press the n button to turn the camera on.
"The camera makes a noise when taking pictures".
The camera may activate the lens and make a
noise even if no operation is performed. This is because the camera automatically performs actions of auto focus as far as it is ready to shoot.
Press the q button to switch to the shooting
Wait until #(flash charge) stops blinking before
When one of the messages below is displayed on the monitor, check the corrective action. Card problem The card write-protect switch is set to the "LOCK" side. · Erase unwanted images. *1 Card problem · Replace the card. · Erase unwanted images. *1 Card problem Use FG to select [FORMAT], and press the H button. Next, use FG to select [YES], and press the H button. *2 Internal memory problem Use FG to select [MEMORY FORMAT], and press the H button. Next, use FG to select [YES], and press the H button. *2 Internal memory/Card problem Take pictures before viewing them. Printer problem Turn off the camera and printer, check the printer for any problems, and then turn the power on again. Problem with selected image Use a computer to print.
JAMMED SETTINGS CHANGED*3
POWER OFF FORMAT
Before erasing important images, download them to a computer. This is displayed, for instance, when the printer's paper tray has been removed. Do not operate the printer while making the print settings on the camera. This camera may be unable to print images taken by other cameras.
POWER OFF MEMORY FORMAT
THE IMAGE CANNOT BE EDITED
Battery problem Charge the battery.
Connection problem Connect the camera and computer or printer correctly. Printer problem Load paper into the printer.
When you are unsure of how to take a picture that you envision, refer to the information below.
"Focusing on the subject"
Taking a picture of a subject not in the center
of the screen After focusing on an object at the same distance as the subject, compose the shot, and take the picture. [. . . ] performed by anyone other than Olympus or an Olympus authorized service station. Any defect or damage that occurs due to transport, a fall, shock, etc. Any defect or damage that occurs due to fire, earthquake, flood damage, thunderbolt, other natural disasters, environmental pollution and irregular voltage sources. Any defect that occurs due to careless or improper storage (such as keeping the product under conditions of high temperature and humidity, near insect repellents such as naphthalene or harmful drugs, etc. ), improper maintenance, etc. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE OLYMPUS FE-4040
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual OLYMPUS FE-4040 will begin.