User manual OLYMPUS MR500I QUICK START GUIDE

[. . . ] D After checking that your m:robe is turned off, place it in its cradle. To a wall outlet LCD RESET ALL SETTINGS b Touch "LANGUAGE. " The "LANGUAGE" screen appears. LANGUAGE b Touch "DATE&TIME. " The "DATE" screen appears. ENGLISH FRANCAIS M/D/Y DATE M 11 D 20 Y 2004 OK CANCEL c Touch the desired language, selecting from the list using (down) or C (up). c Set "M" (month), "D" (day) and "Y" (year) using (forward) or Touch Tip d Touch "OK. " The "m:robe SETTINGS" screen reappears, and the setting is complete. Tip (back). D AC adapter (supplied) A repeatedly if you want to change the order of "M/D/Y. " To cancel the setting, touch "CANCEL" in step d. Thank you for purchasing this OLYMPUS HDD Motion Music Player m:robe MR-500i. This QUICK START GUIDE contains instructions for setup prior to use of this product. You can start using this product immediately after reading this guide. [. . . ] · If playback of music, slide show or remix is stopped and no operation is performed for more than 10 minutes, your m:robe is automatically turned off (Auto Off function). To turn on your m:robe again, press POWER. Trademarks · m:robe and m:trip are trademarks of OLYMPUS CORPORATION. · Windows is a registered trademarks of Microsoft Corporation. U1-NG0468-01 Printed in China YC0410 Setting up m:trip Operating system requirements The following systems are required for m:trip operation. · · · · · · OS: Windows 2000 Professional, Windows XP Professional/Home Edition CPU: Pentium III 500 MHz or later RAM: 128 MB or more (256 MB or more recommended) HD space: at least 200 MB (for installation) USB port: USB 2. 0/1. 1 (USB 2. 0 (High Speed) recommended) Monitor: 800×600 dots or more, 65, 536 colors or more (16, 770, 000 colors recommended) · CD-ROM drive · Internet Explorer 6 or later · Windows Media Player 9 or later Tip a Insert an audio CD into your computer. m:trip automatically runs and this screen appears. Connecting to your computer A Connect the AC adapter to the cradle. Connect the AC cord to the AC adapter, connect the AC adapter to the DC IN 5V jack, and then plug the AC cord into a wall outlet. Listening to music on your m:robe Connecting the remote and headphones Connect the remote and headphones to the device as shown below. B Connect your computer and the cradle using the dedicated USB cable. Tip Run [m-trip] by selecting [start], [(All) Programs] and [OLYMPUS m-trip] if it does not run automatically. Connect the connector with the arrow marks facing down to the USB jack of the cradle. b Click the [Import from audio CD] button on your computer screen. Importing of the audio CD starts. Tips C Place your m:robe in the cradle. To USB jack To DC IN 5V jack To Remote /Headphones jack To a wall outlet A To USB jack Checking the battery If the power is not turned on, press POWER. Check whether the battery is fully charged with the battery indicator displayed in the bottom left of the "HOME" screen. About the remaining battery indication The battery is fully charged. Charge the battery. Operation is not guaranteed with OS upgraded computers. Installing the Music/Photo Organization Software "m:trip" a Turn on your computer and insert the supplied CD-ROM into the CD-ROM drive. This screen appears. · You can also import WMA or MP3 files already stored on your computer, or buy audio files downloaded from the Internet. For details, refer to the m:trip online Help. · You cannot play back audio files on your m:robe that are transferred using the software other than m:trip, such as Windows Explorer. Use only m:trip to transfer audio files to your m:robe. For details, refer to the m:trip online Help. B B C AC adapter (supplied) Cradle (supplied) Computer To PC connecting jack Importing photos Not only can you take photos and store them on your m:robe, but you can also transfer image files already stored on your computer to your m:robe. If you want to transfer the image files on your computer to your m:robe, import them to m:trip before transferring. For details on how to import the files, refer to the m:trip online Help. Tip You can also connect your m:robe directly to the computer as shown above. When connecting directly to the computer, check that the battery is fully charged. Note Battery indicator Tip If your m:robe stops operating while communicating with your computer, your computer may malfunction or data may be lost. We recommend using the AC adapter when connecting to your computer. If the screen above does not appear after inserting the supplied CD-ROM, click [My Computer] on the desktop (from the Start Menu for Windows XP), double-click the CD-ROM icon and run the [Launcher. exe] file. b Click the [m:trip] button. After the Install Wizard screen appears, follow the on-screen instructions. Transferring music/photos from m:trip to your m:robe Checking the USB CONNECTION setting of your m:robe Check that "USB CONNECTION" of your m:robe is set to "PC. " Starting transfer After you connect your m:robe to your computer, m:trip automatically runs. To start transferring, click the [Sync] button in the bottom right of your m:trip screen. [. . . ] When importing audio data from your audio CD, the file format will be WMA. Files cannot be imported as MP3 files with m:trip. a Check that the "SYNCHRONIZATION COMPLETE IT IS SAFE TO DISCONNECT m:robe FROM YOUR PC" message is displayed on your m:robe. J. Smith J. Smith J. Smith J. Smith 4 21 5 01 3 59 4 30 b Click the [Remove m:robe] button on the m:trip screen. OK CANCEL c Take your m:robe out of the cradle. c Check that "PC" is selected. If "PC" is not selected, touch "PC. " When connecting your m:robe directly to the computer, disconnect the dedicated USB cable from your m:robe. b Touch . Playback starts. [. . . ]