User manual OLYMPUS S-DVD-100 QUICK START GUIDE

[. . . ] · Automatic saving of image files: By simply connecting a Dock&Donecompatible digital camera to the unit, image files contained in the digital camera can be automatically stored to recordable DVDs and CDs*. As only new image files are stored, images stored on the DVDs or CDs* will not be duplicated. · You can easily copy image files onto a disk to share them with your friends: Just set the digital camera to "CREATE SHARE DISK" mode and connect to the cradle. You can copy image files in the digital camera and finalize them on a disk. [. . . ] This may cause data loss while recording from your PC to the unit, or a system error on your PC rendering it inoperable. In this case, shut down your PC, power off the unit, and restart your PC and then the unit. Note When disconnecting the digital camera from the cradle, grasp the cradle by the hand firmly. Conducting automatic storing, playing back, and printing a Turn the power switch on. Check that the power indicator (green) and the QDOCK-side indicator (green) are illuminated. PAP RIBB ON ER POWER ACC ESS I O Turn the printer on in advance. b To automatically store image files, set a disk into the unit. Use a disk formatted by the unit, a disk formatted to UDF1. 5 format using B's CLiP6 software, or a blank disk. We recommended using a blank DVD+RW, or DVD-RW disk for auto storing. "STORE : NEW ALL PRINT": New image files are stored and printed. "STORE : QPRINT ORDER": Store new image files and then print images which have been reserved for printing. "STORE ONLY": Conduct only storing of new image files. PRINT": Store new image files and proceed to the print setting screen. "NEW ALL PRINT": Print new image files. "QPRINT ORDER": Print images which have been reserved for printing. PRINT": Proceed to the print setting screen. "EXIT": Exit Dock&Done mode and returns to camera's playback mode without storing or printing image files. When no menu is selected for 20 seconds, processing such as storing is performed automatically. The ACCESS indicator (blue) blinks while images are storing (the printer's indicator blinks while printing). When storing and/or printing are complete, the digital camera's power will automatically turn off. Notes · When closing the storage function, select "EXIT" from the menu on the digital camera. If you disconnect the digital camera from the cradle without exiting from the menu of the camera, the data in the disk may be corrupted (the ACCESS indicator blinks red). · To play back images from another disk, first close the storage function on the menu of the digital camera. Then, after disconnecting the digital camera from the cradle, change the disk and operate the storage function again. Using in the PC mode Be sure to use the OLYMPUS Master software to store the image files on the PC, and browse, edit, print, or manage image files on the disk when the unit is connected to the PC. For details on using the OLYMPUS Master software, refer to the OLYMPUS Master's help and the on-line manual. Notes Share disk creation a Turn the power switch on. Check that the power indicator (green) and the QDOCK-side indicator (green) are illuminated. · Be sure to use the OLYMPUS Master software supplied with the unit. The OLYMPUS Master software supplied with the digital camera may not work properly, depending on its version. · Before you use OLYMPUS Master software, you need to install B's CLiP6 software on your PC. You cannot use B's CLiP6 with any other packet-writing software at the same time. Be sure to uninstall any other packet-writing software on your PC before you install B's CLiP6 software. I O Connecting with a PC Note c Wait until the ACCESS indicator (blue) goes off, then dock the digital camera onto the cradle. The menu screen will be displayed in the digital camera LCD monitor. b From the top menu in the digital camera's playback mode, select "MODE MENU" and then "CREATE SHARE DISK. " For details on digital camera menu operations, refer to the advanced manual supplied with the digital camera. Make sure the power switch of the unit is off before connecting with other components or AC adapter. . a Connect the AC adapter and power cord, and connect the unit to a PC using the USB cable. Insert the power cord plug into the power outlet. · Do not switch to the PC mode while the unit is processing in the Dock&Done mode. The unit does not switch from PC mode to Dock&Done mode until the unit is writing the data ends. [. . . ] The default setting of safety mode is on when installing. For details, refer to the B's CLiP6's help. DOCK MODE STORE PRINT ORDER STORE ONLY STORE SEL. TILL AUTO STORE 9 button a c buttons · Occasionally, image playback or display time may be delayed if there is a significant increase in files added to the disk. · If you perform "STORAGE" for a large movie/sound file, the movie or sound may be played intermittently or not smoothly depending on the digital camera. [. . . ]