User manual OLYMPUS STUDIO 1.2

[. . . ] Introduction Thank you for purchasing this Olympus product. Before you start to use your new Olympus product, please read these instructions carefully to enjoy optimum performance. Note · The contents of this software and this manual may not be reproduced in whole or in part except for personal use. It may not be transferred without permission. · Olympus accepts no responsibility for losses suffered by the customer or a third party as a result of use of this software. [. . . ] Batch processing can be used to resize several images at the same time. 1 Click the [Resize] button on the image processing bar or select [Resize] from the [Image] menu. The [Resize] palette appears. [Resize] palette Item Apply Size Setting Description Check this box to apply the settings to the image. Uncheck this box to cancel the settings. Specify the image size by the number of pixels. and can also be used to specify the size. When the height is specified, the width is automatically changed. The image size is changed within the specified size while maintaining the vertical-horizontal ratio of the image. 158 Image Edit Window 2 3 4 Configure each item. Confirm that [Apply] is checked. When the settings on the palette are changed, [Apply] is automatically checked and the settings are applied to the image. Click the [Resize] button on the image processing bar or select [Resize] from the [Image] menu to close the [Resize] palette. Editing images Distortion Correction This function corrects distortion of the image. Batch processing can be used to correct several images at the same time. 1 Click the [Distortion Correction] button on the image processing bar or select [Distortion Correction] from the [Image] menu. The [Distortion Correction] palette appears. [Distortion Correction] palette Item Apply Auto Manual Description Check this box to apply the settings to the image. Uncheck this box to cancel the settings. The correction information added to the image is read and the image distortion is corrected automatically. If there is no correction information added to the image or the distortion has already been corrected, this option is grayed out and cannot be selected. You can manually correct the image distortion by dragging the slider to the left or right. The distortion correction level can be set from [­100] to [100]. You can click or to set the level in increments of 10. You can also directly enter the correction level. Image Edit Window 2 3 4 Configure each item. Confirm that [Apply] is checked. When the settings on the palette are changed, [Apply] is automatically checked and the settings are applied to the image. Click the [Distortion Correction] button on the image processing bar or select [Distortion Correction] from the [Image] menu to close the [Distortion Correction] palette. · When using [Auto], the distortion may not be properly corrected in images shot using an intermediate ring with the camera lens or using a telephoto lens. Note 159 Editing images Shading Comp. This function corrects the shading (adjusts the amount of peripheral light) of the image. Shading can be corrected only in JPEG, TIFF, or RAW images to which shading information has been added. Batch processing can be used to correct several images at the same time. 1 Click the [Shading Comp. ] button on the image processing bar or select [Shading Comp. ] from the [Image] menu. The [Shading Comp. ] palette appears. [Shading Comp. ] palette Item Apply Auto Manual Description Check this box to apply the settings to the image. Uncheck this box to cancel the settings. [. . . ] 48, 274 Open registered application after saving. 91, 184, 197, 200 Open registered application after saving checkbox . 49, 141, 277, 282, 287 Preferences dialog box . 89, 116, 206, 208 Preview Display Magnification . [. . . ]