User manual OLYMPUS VH-410

[. . . ] DIGITAL CAMERA VH-410 Instruction Manual ● Thank you for purchasing an Olympus digital camera. Before you start to use your new camera, please read these instructions carefully to enjoy optimum performance and a longer service life. Keep this manual in a safe place for future reference. ● We recommend that you take test shots to get accustomed to your camera before taking important photographs. [. . . ] Use FG to select [U], and press the A button. Follow Steps 5 and 6 in [<]. 1 2 3 4 5 6 7 Follow Steps 1 and 2 in [<] (p. Use FG to select [<], and press the A button. Use FG to select [Keep] and press the A button. Use HI to select the image with the print reservation you want to cancel. Use FG to set the print quantity to “0”. If necessary, repeat Step 4, and then press the A button when finished. Use FG to select the [X] (date print) screen option, and press the A button. ● The settings are applied to the remaining images with the print reservation data. Resetting all print reservation data Follow Steps 1 and 2 in [<] (p. Select either [<] or [U], and press the A button. Use FG to select [Reset], and press the A button. Use FG to select [Set], and press the A button. 44 EN Usage Tips If the camera does not work as intended, or if an error message is displayed on the screen, and you are unsure of what to do, refer to the information below to fix the problem(s). Monitor “Difficult to see”. Turn off the power, and wait for the camera body to become acclimated to the surrounding temperature and dry out before taking pictures. “Vertical lines appear on the monitor”. ● This condition may occur when the camera is pointed at an extremely bright subject under a clear sky and so on. The lines may appear on the recorded picture or movie with sequential shots. “The light is caught in the picture”. ● Shooting with flash in dark situations results in an image with many flash reflections on dust in the air. Troubleshooting Battery “The camera does not work even when batteries are installed”. ● Insert recharged batteries in the correct direction. “Inserting and removing the battery and card” (p. 4), “Charging the battery” (p. 5) ● Battery performance may have been reduced temporarily due to low temperature. Take the batteries out of the camera, and warm them by putting them in your pocket for a while. Date and time function “Date and time settings return to the default setting”. [. . . ] Olympus reserves the right to refuse free-of-charge service if neither Guarantee Certificate is completed nor the above document is attached or if the information contained in it is incomplete or illegible. 2 Since this Guarantee Certificate will not be re-issued, keep it in a safe place. * Please refer to the list on the web site: http://www. olympus. com for the authorized international Olympus service network. 66 EN 4 This Warranty applies to the product only; the Warranty does not apply to any other accessory equipment, such as the case, strap, lens cap and batteries. [. . . ]