User manual OLYMPUS X-44
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual OLYMPUS X-44. We hope that this OLYMPUS X-44 user guide will be useful to you.
Lastmanuals help download the user guide OLYMPUS X-44.
Manual abstract: user guide OLYMPUS X-44
Detailed instructions for use are in the User's Guide.
[. . . ] DIGITAL CAMERA
Thank you for purchasing an Olympus digital camera. Before you start to use your new camera, please read these instructions carefully to enjoy optimum performance and a longer service life. We recommend that you take test shots to get accustomed to your camera before taking important photographs. In the interest of continually improving our products, Olympus reserves the right to update or modify information contained in this manual. [. . . ] 43)
"No picture is taken when the shutter button is pressed".
"The camera makes a noise when taking pictures".
Cancel sleep mode.
To save battery power, the camera automatically goes into sleep mode and the monitor turns off if there is no operation for 3 minutes when the camera is turned on. No picture is taken even if the shutter button is fully pressed in this mode. Operate the zoom buttons or other buttons to restore the camera from sleep mode before taking a picture. If the camera is left for another 12 minutes, it automatically turns off. Press the n button to turn the camera on.
The camera may activate the lens and make a
noise even if no operation is performed. This is because the camera automatically performs actions of auto focus as far as it is ready to shoot.
Press the q button to switch to the shooting
Wait until #(flash charge) stops blinking before
When one of the messages below is displayed on the monitor, check the corrective action. Card problem The card write-protect switch is set to the "LOCK" side. · Erase unwanted images. *1 Card problem · Replace the card. · Erase unwanted images. *1 Card problem Use FG to select [FORMAT], and press the H button. Next, use FG to select [YES], and press the H button. *2 Internal memory problem Use FG to select [MEMORY FORMAT], and press the H button. Next, use FG to select [YES], and press the H button. *2 Internal memory/Card problem Take pictures before viewing them. Connection problem Connect the camera and computer or printer correctly. Printer problem Turn off the camera and printer, check the printer for any problems, and then turn the power on again. Problem with selected image Use a computer to print.
JAMMED SETTINGS CHANGED*3
POWER OFF FORMAT
Before erasing important images, download them to a computer. This is displayed, for instance, when the printer's paper tray has been removed. Do not operate the printer while making the print settings on the camera. This camera may be unable to print images taken by other cameras.
POWER OFF MEMORY FORMAT
THE IMAGE CANNOT BE EDITED
When you are unsure of how to take a picture that you envision, refer to the information below.
"Focusing on the subject"
Taking a picture of a subject not in the center
of the screen After focusing on an object at the same distance as the subject, compose the shot, and take the picture. 14)
The subject is not in the center of the frame
"Taking pictures without camera shake"
Set [AF MODE] (p. 28) The camera tracks the subject movement automatically to focus on it continuously.
Taking pictures using N mode (p. 20)
The C (SPORT) mode uses a fast shutter speed and can reduce the blur incurred by a moving subject.
Taking a picture of subjects where autofocus
is difficult In the following cases, after focusing on an object (by pressing the shutter button halfway down) with high contrast at the same distance as the subject, compose the shot, and take the picture.
Taking pictures at a high ISO sensitivity
If a high ISO sensitivity is selected, pictures can be taken at a high shutter speed even at locations where a flash cannot be used. 25)
Subjects with low contrast
"Taking pictures with the right brightness"
Taking pictures using [FILL IN] (p. 23) flash
When extremely bright objects appear in the center of the screen
A subject against backlight is brightened.
Taking pictures using exposure compensation
(p. [. . . ] To claim under warranty the customer must take the product and this Warranty certificate before the end of the one year warranty period to the dealer where the product was purchased or any Olympus authorized service station listed in the instructions and request the necessary repairs. 2 The customer shall transport the product to the dealer or Olympus authorized service station at his own risk and shall be responsible for any costs incurred in transporting the product. 3 This warranty does not cover the following and the customer will be required to pay repair charge, even for defects occurring within the one year period referred to above. Any defect that occurs due to mishandling (such as an operation performed that is not mentioned in the Handling Care or other sections of the instructions, etc. )
b. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE OLYMPUS X-44
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual OLYMPUS X-44 will begin.