User manual OMRON A165W DATASHEET

[. . . ] Number of Notches/Reset Method 2M: 2 notches/Manual 2A: 2 notches/Automatic 3M: 3 notches/Manual 3A: 3 notches/Mixed-operation 3MA: 3 notches 3AM: 3 notches 4. Illumination Color None: Black (Non-lighted models only) R: Red G: Green Y: Yellow 2. Switch (Same as for Key-type Selector Switches) A16S-@- [. . . ] Combinations that are not available as sets can be created using individual Units. Also, store the parts as spares for maintenance and repairs. Selector Selectors with Knobs Rectangular Models Square Models Round Models Lighted Models Non-lighted Models Lamp LED only Note: Temperature rises in incandescent lamps can cause heat deformation. Switch Solder terminals (no transformer) PCB terminals Lighted/non-lighted Lighted/non-lighted Knob-type Selector Switch A165S/W G-63 Pushbutton Switches Selectors (Oil-resistant IP65 Models Only) Appearance Number of notches 2 notches Reset method Manual Lighting method LED Non-lighted LED Non-lighted 3 notches Manual LED Non-lighted LED Non-lighted LED Non-lighted LED Non-lighted LED Non-lighted LED Non-lighted 3 notches Manual LED Non-lighted LED Non-lighted LED Non-lighted LED Non-lighted LED Non-lighted LED Non-lighted 3 notches Manual LED Non-lighted LED Non-lighted LED Non-lighted LED Non-lighted Operating voltage 24 VDC --24 VDC --24 VDC --24 VDC --24 VDC --24 VDC --24 VDC --24 VDC --24 VDC --24 VDC --24 VDC --24 VDC --24 VDC --24 VDC --24 VDC --24 VDC --24 VDC --24 VDC --Model A165W-J2M@ A165S-J2M A165W-J2A@ A165S-J2A A165W-J3M@ A165S-J3M A165W-J3A@ A165S-J3A A165W-J3MA@ A165S-J3MA A165W-J3AM@ A165S-J3AM A165W-A2M@ A165S-A2M A165W-A2A@ A165S-A2A A165W-A3M@ A165S-A3M A165W-A3A@ A165S-A3A A165W-A3MA@ A165S-A3MA A165W-A3AM@ A165S-A3AM A165W-T2M@ A165S-T2M A165W-T2A@ A165S-T2A A165W-T3M@ A165S-T3M A165W-T3A@ A165S-T3A A165W-T3MA@ A165S-T3MA A165W-T3AM@ A165S-T3AM R (red), Y (yellow), G (green) R (red), Y (yellow), G (green) Selector color symbol R (red), Y (yellow), G (green) Rectangular (A165@-J) Automatic Fully automatic 3 notches Mixedoperation Mixedoperation Square (A165@-A) 2 notches Manual Automatic Fully automatic 3 notches Mixedoperation Mixedoperation Round (A165@-T) 2 notches Manual Automatic Fully automatic 3 notches Mixedoperation Mixedoperation Note: 1. Enter the desired color symbol for the Selector in the @. The selector for non-lighted models is black. Switches Appearance Lighted Socket (without voltage-reduction lighting) Classification 2 notches 3 notches 2 notches 3 notches Lighted Non-lighted 2 notches SPDT DPDT DPDT SPDT DPDT DPDT SPDT DPDT SPDT DPDT PCB terminal Solder terminal Model A16S-2N-1L A16S-2N-2L A16S-3N-2L A16S-2N-1 A16S-2N-2 A16S-3N-2 A16S-2N-1LP A16S-2N-2LP A16S-2N-1P A16S-2N-2P Non-lighted G-64 Knob-type Selector Switch A165S/W Lamps LED Operating voltage 5 VDC 12 VDC 24 VDC Light color Red Yellow Green A16-5DSR A16-5DSY A16-5DSG A16-12DSR A16-12DSY A16-12DSG A16-24DSR A16-24DSY A16-24DSG Accessories (Order Separately) Accessories Name Panel Plugs Appearance Rectangular Square Round Classification Model A16ZJ-3003 A16ZA-3003 A16ZT-3003 Remarks Used for covering the panel cutouts for future panel expansion. Degree of protection: IP40 Tools Name Appearance Model Applicable types Pushbutton Knob-type Switch Selector Switch Screw Fitting A16Z-3004 Yes Yes Key-type Selector Switch Yes Emergency Stop Switch Yes Indicator Remarks Yes Extractor A16Z-5080 Yes Yes Yes Yes Yes Convenient for extracting the Switches and Lamps. Knob-type Selector Switch A165S/W G-65 Pushbutton Switches Convenient for ganged installation. Tighten to a torque of 0. 39 N·m min. Specifications Approved Standards Agency UL, cUL (See note. ) --Standards UL508 EN60947-5-1 --File No. 14 Approved Standard Ratings UL, cUL (File No. E41515) 5 A at 125 VAC, 3 A at 250 VAC (general use) 3 A at 30 VDC (resistive) EN60947-5-1 (Low Voltage Directive) 3 A at 250 VAC (AC12), 3 A at 30 VDC (DC12) Ratings Contacts AC resistive load 3 A at 250 VAC 5 A at 125 VAC DC resistive load 3 A at 30 VDC Super-bright LED Rated voltage 5 VDC 12 VDC 24 VDC Rated current 30 mA (15 mA) 15 mA 10 mA Operating voltage 5 VDC±5% 12 VDC±5% 24 VDC±5% Internal limiting resistor 33 (68 ) 270 (560 ) 1600 (2, 000 ) Minimum applicable load: 1 mA at 5 VDC Rated values are obtained from tests conducted under the following conditions. Load: Resistive load Mounting conditions: No vibration and no shock Temperature: 20±2°C Operating frequency: 20 times/min Note: The values in parentheses are for blue Selectors. Characteristics Item Allowable operating frequency Insulation resistance Dielectric strength Mechanical Electrical 20 operations/minute max. (at 500 VDC) 1, 000 VAC, 50/60 Hz for 1 min between terminals of same polarity 2, 000 VAC, 50/60 Hz for 1 min between terminals of different polarity and also between each terminal and ground 1, 000 VAC, 50/60 Hz for 1 min between lamp terminals (see note 2) Malfunction Mechanical Malfunction Durability Ambient temperature Ambient humidity Electric shock protection class PTI (tracking characteristic) Degree of contamination Weight Mechanical Electrical 10 to 55 Hz, 1. 5-mm double amplitude (malfunction within 1 ms) 500 m/s2 150 m/s2 max. (malfunction within 1 ms) 250, 000 operations min. Operating: -10°C to 55°C (with no icing or condensation) Storage: -25°C to 65°C (with no icing or condensation) Operating: 35% to 85% Class II 175 3 (IEC947-5-1) Approx. 13 g (in the case of a lighted DPDT switch) Knob-type Selector Switch Vibration resistance Shock resistance Note: 1. With LED and incandescent lamp not mounted. G-66 Knob-type Selector Switch A165S/W Screw-less Clamp Item Recommended wire size Usable wires and ten- Twisted wire sile strength Solid wire Tensile strength Length of exposed wire 0. 3mm2 0. 5 mm dia. 10 N 10 ±1 mm 0. 5 mm2 0. 8 mm dia. 20 N Screw-less Clamp 0. 5 mm2 twisted wire or 0. 8 mm-dia. 30 N 1. 25 mm2 --40 N Operating Characteristics Type Features Operating force (OF) max. Set position (SP) 9. 8 N·m 90±5° 2 notches Knob-type Selector Switch 3 notches 45+10° 0 Operation Angle Two notches Three notches Contact Form Name SPDT COM NO Contact NC SW2 Notch SW1 Contact SPDT Position SW Position DPDT SW2 SW1 2 notches 3 notches --- Knob-type Selector Switch A165S/W G-67 Pushbutton Switches Note: 1. [. . . ] A143) and the Precautions section for the A16. Knob-type Selector Switch A165S/W G-73 Pushbutton Switches Note: 1. Ensure that the variation in the distance between the centers of neighboring mounting holes is less than ±0. 1 mm. Make sure the thickness of the mounting panel is 0. 5 to 3. 2 mm. [. . . ]