User manual OMRON CX-PROGRAMMER V9

[. . . ] W446-E1-12 SYSMAC CX-Programmer Ver. 9. CXONE-AL_C-V4/AL_D-V4 OPERATION MANUAL SYSMAC CX-Programmer Ver. D-V4 Operation Manual Revised July 2010 OMRON CX-Programmer ­ Operation Manual About this Manual (W446): This manual describes the operation of the CX-Programmer and consists of the following three parts. · Part 1: CX-Programmer This part describes the CX-Programmer software that is a PLC Programming Device, and also provides the overall precautions and the version upgrades information. [. . . ] The following conventions are used to indicate and classify precautions in this manual. Always heed the information provided in them. Failure to heed precautions can result in injury to people or damage to the product. DANGER WARNING Caution Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. Additionally, there may be severe property damage. Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. Additionally, there may be severe property damage. Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury, or property damage. OMRON Product References All OMRON products are capitalised in this manual. The word "Unit" is also capitalised when it refers to an OMRON product, regardless of whether or not it appears in the proper name of the product. The abbreviation "PLC" means Programmable Logic Controller and is not used as an abbreviation for anything else. CX-Server PLC Tools_Page (i) OMRON PART 2: CX-Server PLC Tools Visual Aids The following headings appear in the left column of the manual to help you locate different types of information. Indicates information of particular interest for efficient and convenient operation of the product. Indicates lists of one sort or another, such as procedures, checklists etc. Represents a shortcut on the Toolbar to one of the options available on the menu of the same window. Other manual conventions are as follows: · Windows-based applications provide users with a number of different ways to perform one operation. These are normally: from the application menu bar; using icons on a Toolbar; using keyboard shortcuts; using the right-mouse button to display a context-sensitive menu; dragging and dropping. Whilst recognising this, the manual provides user instructions employing the Toolbar and right-mouse button only. Use of the application menu bar or keyboard shortcuts are only included if no such alternatives exist. Access to the CX-Server middleware is normally via other software applications, such as CX-Programmer or CX-Protocol. This is noted in the manual by the term "invoking application". This manual refers to two distinct types of project: CX-Server projects and application projects. A CXServer project is defined in this manual. An application project is defined by the software application invoking CX-Server. · · OMRON, 2005 All rights reserved. [. . . ] Symbols are inherited by CX-Server by the invoking application. OMRON high speed industrial network (either co-axial or fibre optic). OMRON high speed optical LAN which can be of type C SYSMAC NET or CV SYSMAC NET. An area of memory used for controlling and managing a unit. [. . . ]