User manual OMRON D5B DATASHEET

[. . . ] 14. 7 N {1. 5 kgf} (see note 5) Switch: M5: approx. 10 g/m Degree of protection Life expectancy (see note 2) Operating speed Operating frequency Insulation resistance Contact resistance Dielectric strength Vibration resistance Shock resistance Ambient temperature Ambient humidity Actuator strength Weight Note: 1. Life expectancy values are calculated at an operating temperature of 5°C to 35°C, and an operating humidity of 40% to 70%. Contact your OMRON sales representative for more detailed information on other operating environments. [. . . ] 5 2 6. 9±2 2. 5 S-FLEX V-HKCVV equal level, 3 dia. M5 × 0. 5 2 (see note 2) 0. 08 mm Two cores Clamping nut Stainless steel wire Toothed lock washer Note: 1. Operating characteristics (X, Y) measuring position 2. The threads of the case are not standard; 0. 5-mm pitch. There fore standard tapping to the case is not possible for mounting. 268 D5B M8 Type Hemispheric Plunger D5B-801@ (28) 13 Resin plunger 4 (See note 1) D5B 7. 3 16. 7 (15) 7 dia. M8 × 0. 5 (see note 2) Clamping nut S-FLEX V-HKCVV equal level, 3 dia. 0. 08 mm2 Two cores 3. 5R 3. 5 2. 5 (Rising part of the ball) Toothed lock washer Cone-shaped Plunger D5B-802@ 13 Resin plunger (See note 1) (32. 5) 8. 5 7. 3 16. 7 (15) 7 dia. 0. 8R 1 (92. 8) 13 Stainless steel wire 68. 8±2 (See note 1) 7. 3 16. 7 M8 × 0. 5 (see note 2) 2. 5 Clamping nut Toothed lock washer S-FLEX V-HKCVV equal level, 3 dia. 0. 08 mm2 Two cores Wobble Stick D5B-851@ (15) 7 dia. 3 11. 8±2 M8 × 0. 5 (see note 2) 2. 5 Clamping nut Toothed lock washer S-FLEX V-HKCVV equal level, 3 dia. Operating characteristics (X, Y) measuring position 2. The threads of the case are not standard. Therefore standard tapping to the case is not possible for mounting. M10 Type Hemispheric Plunger D5B-101@ 13 Resin plunger 5. 5 (33. 3) 7. 3 20. 5 (see note 1) 18 dia. 15 9 dia. M10 × 0. 5 0. 08 mm2 (see note 2) Two cores 4. 5R 4. 5 2. 5 Clamping nut Toothed lock washer (Rising part of the ball) Cone-shaped Plunger D5B-102@ 15 18 dia. 13 Stainless steel wire (See note 1) 11. 5 (39. 3) 7. 3 20. 5 9 dia. 0. 9R 1 S-FLEX V-HKCVV M10 × 0. 5 equal level, 3 dia. 2 (see note 2) 0. 08 mm Two cores Clamping nut 2. 5 Toothed lock washer (111. 1) Resin plunger 83. 3 (See note 1) 7. 3 20. 5 Wobble Stick D5B-151@ 13 18 dia. 0. 6 dia. 5 5 13. 3 2. 5 S-FLEX V-HKCVV M10 × 0. 5 equal level, 3 dia. (see note 2) 0. 08 mm2 Clamping nut Two cores Toothed lock washer 269 D5B D5B-153@ D5B 13 (111. 1) Stainless steel wire 83. 3 (See note 1) 7. 3 20. 5 15 18 dia. 9 dia. 4. 6 dia. 0. 6 dia. 5 5 33. 3 2. 5 S-FLEX V-HKCVV equal M10 × 0. 5 level, 3 dia. (see note 2) 0. 08 mm2 Two cores Clamping nut Toothed lock washer Note: 1. Operating characteristics (X, Y) measuring position 2. The threads of the case are not standard. Therefore standard tapping to the case is not possible for mounting. Precautions Correct Use An excessive load may deform the base. [. . . ] Attach an appropriate cover for protecting the D5B from direct exposure to sprayed oil or water. No protective cover is, however, provided together with the D5B. The D5B may be damaged by ozone and failures may result if the D5B is used outdoors. Consult your OMRON representative before attempting to use the D5B outdoors. [. . . ]