User manual OMRON F3E DATASHEET

[. . . ] Ultra-flat multi-beam sensor for elevators F3E · Ultra-flat 9 mm shape for easy design-in in elevator constructions · Highest ambient light immunity (200, 000 lux) for installations with direct sunlight exposition · Triple crossing resolution maintained close to zero distance · Robust aluminum housing · Ray failure toleration · Test input · Built-in amplifier (operation with 10-30 VDC) · Fulfills requirements of EN81-70 Designed & manufactured by STRACK LIFT AUTOMATION Ordering Information Pitch 120 mm 40 mm Detection area 1800 mm 1800 mm channels 16 46 Number of Connection optical axis 46 5 m pre-wired M8 Connector (4-pin) 136 5 m pre-wired M8 Connector (4-pin) Output potentialfree output Model number F3E-16-T1 5M F3E-16-T6 F3E-46-T1 5M F3E-46-T6 Features High reliability and flexibility: Test input: Function of multi-beam sensor can be tested by transmitter cut off on test signal. A subsequent receiver cut off can be monitored by control unit. Ray failure toleration: As soon as one channel is not switching for more than 60 seconds, the F3E identifies a defect and deactivates this channel. [. . . ] 240 mA / pair Wearless potential free output, 35 V AC/DC max. , 150mA max. at 60°C, D-ON (parameterization by emitter test input), max. leakage at open contact 0, 001mA, contact resistance 4/12 Ohm 110 ms max. response time 200. 000 lux -20. . . +60°C (operation) 3, -40. . . +70 (storage) 73/23/EWG; 89/336/EWG; 95/16/EG; EN81-1; EN81-2; EN12015; EN12016; EN61000-6-x IP54 Pre-wire type (5 m PVC cable), M8-4-PIN Emitter: power indicator (yellow); Receiver: output indicator (yellow), output indicator (red) Red LED blinking: unstable operation, contamination, max. exceeding sensing distance Red LED ON + yellow LED ON: beam channel defect 2070x40, 7x9 mm 2000x40, 7x9 mm 880g (connector version), 1040g (cable version) Aluminum PVC Test input / light emission stop function Ambient light immunity 2 Ambient temperature EMC conformity/standards Protective degree Connection methods Indicator LEDs Error status indication Dimension1 Weight Material 1 2 3 Case Cable other sizes available on request Measured at angle of 20° No icing and condensation 2 C B F3E Multibeam sensor Output circuits Receiver brown Status Warning I 2 Main circuit max. 250 mA / 35 V AC/DC black 4 blue 3 Load 4 blue 3 0V alternatively Main circuit black (not used) 1 white Load 10 to 30 V DC Transmitter brown Power indicator (green) 1 test input and programming white 2 alternatively 10 to 30 V DC (yellow) (red) potential free Connector PIN Arrangement 24 1 3 Connector PIN Arrangement 24 1 3 Dimensions Mounting strap fixation LED red LED yellow light rays 8 a4 9 Dimension a5 a4 a3 a2 a1 h F3E-16. . . 25 mm 690 mm 640 mm 690 mm 25 mm 2070 mm F3E-46. . . 25 mm 650 mm 650 mm 650 mm 25 mm 2000 mm a5 7 40. 75 8 a3 6 9 1. 5 5 4 2 ø4 . 5 5. 5 F3E Multibeam sensor a1 1 a2 3 h 3 Accessories Cable connectors Type slim line straight Size M8 Cable Material PVC Poles 4 Length (m) 5 LED Nut Order reference no brass XS3F-M421-405-A slim line angled M8 PVC 4 5 no brass XS3F-M422-405-A robotic cable straight M8 PVC 4 5 no brass XS3F-M421-405-R robotic cable angled M8 PVC 4 5 no brass XS3F-M422-405-R Note: Complete portfolio of connector types see OMRON Accessory Datasheet F3E-Accessories Item F3E-Installation Kit S F3E-Installation Kit M F3E-Power supply Description Installation kit for stationary mounting on lift doors Installation kit for mounting to mobile doors panels Power supply NTR 18/03 for operation with 240VAC/24DC, buzzer function Order reference F3E-IK-S F3E-IK-M F3E-PS1 4 F3E Multibeam sensor Installation Kit S M5x16 The upper mounting angle is screwed to the top of the door operator. M4x10 upper mounting angle vertical mounting angle sensor unit with mounting strap fixation M4x12 sensor unit with mounting strap fixation M4x12 The lower mounting angle is screwed to the underside of the door sill. Then the vertical mounting angle - with the sensor unit already screwed onto it is inserted with its conical end into the slot in the lower mounting angle. vertical mounting angle cone lower mounting angle M6x16 Installation Kit M door panel mounting clamps sensor unit with strap fixation F3E Multibeam sensor 5 Precautions @ WARNING The F3E multi-beam photoelectric sensor is not a safety component for ensuring the safety of people which is defined in EC directive (2006/42/EC) or by any other regulations or standards. Power Supply Voltage and Output Load Power Supply Voltage Do not connect an AC power supply to the Sensor. If AC power (100 VAC or more) is supplied to the Sensor, it may explode or burn. Make sure that the power supply to the Sensor is within the rated voltage range. If a voltage exceeding the rated voltage range is supplied to the Sensor, it may explode or burn. Operating Environment Do not use the Sensor in locations with explosive or flammable gas. Make sure that the product is operated in accordance with IP54 standards. [. . . ] Do not use pliers; otherwise the connector may be damaged. If the connector is not connected securely, it may be disconnected by vibration or the proper degree of protection of the Sensor may not be maintained. Cat. E48E-EN-01A In the interest of product improvement, specifications are subject to change without notice. OMRON EUROPE B. V. Wegalaan 67-69, NL-2132 JD, Hoofddorp, The Netherlands Phone: +31 23 568 13 00 Fax: +31 23 568 13 88 www. industrial. omron. eu 6 F3E Multibeam sensor [. . . ]