User manual OMRON G3NE

[. . . ] · Built-in varistor effectively absorbs external surges. · Quick-connect #110 input terminals and #250 output connections. (#187 input terminals and #250 output connections are available. ) · "-US" models certified by UL, CSA, and IEC/EN (TÜV). Model Number Structure Model Number Legend G3NE- [. . . ] 250 ±20% 600 ±20% 1. 6 k±20% Input impedance With zero cross function Without zero cross function 300 ±20% 800 ±20% Note: Each model has 5-VDC, 12-VDC, and 24-VDC input versions. Output Model Rated load voltage Load voltage range Applicable load Load current (See note 1. ) With heat sink G3NE-205T(L)(-2)-US G3NE-210T(L)(-2)-US G3NE-220T(L)(-2)-US 100 to 240 VAC 75 to 264 VAC 0. 1 to 5 A 0. 1 to 10 A (See note 2. ) 0. 1 to 20 A (See note 2. ) Without heat sink 0. 1 to 5 A 0. 1 to 5 A 0. 1 to 5 A 60 A (60 Hz, 1 cycle) 150 A (60 Hz, 1 cycle) 220 A (60 Hz, 1 cycle) Inrush current Note: 1. The load current varies depending on the ambient temperature. Ambient Temperature under Engineering Data for details. These values apply when using a dedicated heat sink or a radiation plate of specified size. J-18 Solid State Relays G3NE Characteristics Item Operate time Release time Output ON voltage drop Leakage current Insulation resistance Dielectric strength Vibration resistance Shock resistance Ambient temperature Ambient humidity Certified standards Weight G3NE-2T(-2)-US 1/2 of load power source cycle + 1 ms max. 1/2 of load power source cycle + 1 ms max. (at 500 VDC) 2, 000 VAC, 50/60 Hz for 1 min Destruction: 10 to 55 to 10 Hz, 0. 75-mm single amplitude Destruction: 1, 000 m/s2 Operating: ­30°C to 80°C (with no icing or condensation) Storage: ­30°C to 100°C (with no icing or condensation) Operating: 45% to 85% UL508 File No. E64562/CSA C22. 2 (No. 0, No. 14) File No. LR35535 TÜV R9051064 (VDE0435) (EN60950) Approx. TL(-2)-US Engineering Data Load Current vs. Ambient Temperature G3NE-205T(L)(-2)-US Without heat sink G3NE-210T(L)(-2)-US With standard heat sink (Y92B-N50) or aluminum plate measuring 100 mm x 100 mm x t2 mm (W x H x D) G3NE-220T(L)(-2)-US With standard heat sink (Y92B-N100) or aluminum plate measuring 300 mm x 300 mm x t3 mm (W x H x D) Load current (A) Load current (A) Without heat sink Load current (A) Without heat sink Ambient temperature (°C) Ambient temperature (°C) Ambient temperature (°C) One Cycle Surge Current: Non-repetitive Note: Keep the inrush current to half the rated value if it occurs repetitively. G3NE-205T(L)(-2)-US Inrush current (A. Peak) G3NE-210T(L)(-2)-US Inrush current (A. Peak) G3NE-220T(L)(-2)-US SSR Energized time (ms) Energized time (ms) Energized time (ms) Solid State Relays G3NE J-19 Dimensions Note: All units are in millimeters unless otherwise indicated. G3NE-205T(L)/210T(L)/220T(L)(-2)-US 3. 5 dia. hole 47. 5 max. Terminal Arrangement/ Internal Connections (Top View) 3+ Input voltage Input Output 37. 5 max. 14. 5 1 Load 30+0. 5 Two #250 (t = 0. 8) (Faston tab or equivalent) 7. 95 3 11. 5 max. Two #110 (t = 0. 5) (Faston tab or equivalent)* 7. 1 2. 9 6 6. 5 4- 2 Load power supply Mounting Holes * G3NE-2T(L)-2-US: Two, #187 (t=0. 5) (Faston tab or equivalent) Two, 3. 5-dia. or M3 holes 30±0. 2 Heat Sink Y92B-N50 Mounting Holes 4. 6 dia. hole Two, M3 holes Two, M4 holes Two, 3. 2-dia. [. . . ] When attaching a heat sink to the G3NE, in order to facilitate heat dissipation, apply heat-conductive grease on the heat sink. Tighten the mounting screws of the heat sink with a torque of 0. 59 to 0. 98 N·m. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0. 03937. [. . . ]