User manual OMRON G3PB

[. . . ] Solid State Relays (Single-phase) G3PB Compact, Slim-profile SSR with Heat Sink, Offering Heater Control for 480-VAC Rated Loads · Compact design achieved by optimizing heat sink shape. · DIN track mounting possible in addition to screw mounting. · Conforms to CE Marking, EN (VDE approval), CSA, and VDE standards. (UL pending) Note: Refer to Precautions on page 5. Model Number Structure Model Number Legend G3PB- [. . . ] · Be sure to use M5 crimp terminals that are an appropriate size for the wire diameter when wiring G3PB with a load current of 35 A min. · Do not use wires with a damaged sheath. Doing so may result in electric shock or a short circuit. · Do not wire power lines or high-tension lines along with the lines of the G3PB in the same conduit or duct. Doing so may result in damage or malfunction due to induction. · Use wires of an appropriate length. Wires of insufficient length may result in malfunction, failure, or burning due to induction. Not doing so may cause the DIN Track to fall. · Make sure that the G3PB clicks securely into place when it is mounted to the DIN Track. Not doing so may cause the G3PB to fall. · Do not install the G3PB using hands that are dirty with oil or metal dust. · Tighten the heat sink screws securely to a tightening torque of 0. 98 to 1. 47 N·m. Usage Conditions · Select a load within the rated values. Not doing so may result in malfunction, failure, or burning. · Use a power supply within the rated frequency range. Not doing so may result in malfunction, failure, or burning. Do not transport the G3PB under the following conditions. Doing so may result in malfunction, failure, or deterioration of performance characteristics. · During high temperatures or high humidity. · When the G3PB is not packaged. Solid State Relays (Single-phase) G3PB 5 6. Operating and Storage Locations Do not use or store the G3PB in the following locations. Doing so may result in damage, malfunction, or deterioration of performance characteristics. · · · Do not use or store in locations subject to direct sunlight. [. . . ] Installation Do not install the G3PB using hands that are dirty with oil or metal dust. Doing so may result in a malfunction. Leakage current Input circuit Varistor 4. Do Not Drop Be careful not to drop the product during installation, mounting, or otherwise handling the G3PB. Solid State Relays (Single-phase) G3PB 7 Warranty and Application Considerations Read and Understand this Catalog Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. [. . . ]