User manual OMRON G3RV

[. . . ] E64562) Model G3RV-SL700/500-D Series Input ratings 12, 24 VDC 24, 48 VAC/DC 110, 230 VAC 12, 24 VDC 24, 48 VAC/DC 110, 230 VAC Contact ratings 24 VDC 3 A (Resistive Load) at 25°C G3RV-SL700/500-A(L) Series 240 VAC 2 A (Resistive Load) at 25°C IEC/TUV (EN 62314) Input ratings 12, 24 VDC 24, 48 VAC/DC 110, 230 VAC 12, 24 VDC 24, 48 VAC/DC 110, 230 VAC Contact ratings 24 VDC 3 A (Resistive Load) 240 VAC 2 A (Resistive Load) Slim Relay G3RV 3 Engineering Data Load current derating curves G3RV-SL700/500-A(L) Series Mounting Distance 10mm Mounting Distance 0mm G3RV-SL700/500-D Series Mounting Distance 10mm Mounting Distance 0mm One Cycle Surge Current: Non-repetitive Non-repetitive (Keep the inrush current to half the rated value if it occurs repetitively. ) The values shown by the solid line are for non-repetitive inrush currents. G3RV-SL700/500-A(L) Series G3RV-SL700/500-D Series 4 Slim Relay G3RV Accessories PLC Interface (for G2RV-SL700 & G3RV-SL700 series only) List of Models Model number P2RVC-8-O-F Description PLC Output Interface for 8x G2RV-SL700 & G3RV-SL700 series PNP - type Connection Ribbon cable connector 10 Pole, IEC603/1 Specifications Input Rated voltage Current capacity Characteristics Ambient temperature Overvoltage category Pollution degree 30 VAC/VDC max. 0. 5 A per channel 2. 0 A total current, power supply terminal Operating: 0 to 55°C Storage: - 20 to 85°C III 2 Electrical schematic P2RVC-O-8-F Slim Relay G3RV 5 SSR for Maintenance Model Number Legend G3RV-@ @ @ @ 1 23 4 1. Output voltage specifications D: DC Output 2: AC Output 2. Rated Current 02: AC Output 2A 03: DC Output 3A 3. [. . . ] · Confirm that the socket is securely attached to the mounting track before wiring. If the socket is mounted insecurely it may fall and injure the operator. · Ensure that the socket is not charged during wiring and maintenance. Not doing so may result in electric shock. · Do not pour water or cleansing agents on the product. · Do not use the socket in locations subject to solvents or alkaline chemicals. · Do not use the socket in locations subject to ultraviolet light (e. g. , direct sunlight). Doing so may result in markings fading, rust, corrosion, or resin deterioration. · Do not dispose the product in fire. · Do not insert two or more wires in the hole. Minor hazard by electric shock may occasionally occur. Do not touch the G3RV's main circuit terminals immediately after the power is turned OFF. The internal snubber circuit is charged. * 202S, SL, G3RV-A(L) Type only Minor hazard by burns may occasionally occur. Do not touch the G3RV or the heat sink either while the power supply is ON, or immediately after the power is turned OFF. The G3RV and the heat sink will be hot. Precautions for Safe Use Transpporting Do not use or store the G3RV in the following transporting. of Doing so may result in damage, mulfunction, or detericration of performance characteristics. · Conditions under which the G3RV will be exposed to water. · High temperatures or high humidity. Operating and Strage Locations Do not use or store the G3RV, in the following locations. Doing so may result in damage, mulfunction, or detericration of performance characteristic. · Locations subject to rain or water drops. · Locations subject to exposure to water, or oil, or chemicals. [. . . ] To the restrict heating, attach a fan to the ventilation outlet or air inlet of the control panel to ventilate the panel. This will reduce the ambient temperature of the G3RVs and thus increase reliability. (Generally, each 10°C reduction in temperature will double the expected life. ) EMI · This is a class A product. In residential areas it may cause redio interference, in which case the user may be required to take adequate measures to reduce interference. Vertical direction 30mm min. [. . . ]