User manual OMRON G6D-F4B DATASHEET

[. . . ] Relay and MOS FET relay models are available. Tool for easy mounting or removal of Relays provided. G6D-F4B/G3DZ-F4B Ordering Information Model Number Legend: G6D/G3DZ-jj 1 2 1. Terminal Form F: Flat type Output Contact configuration SS SPST-NO O 4 2. Number of Relays Mounted 4B: 4 Rated coil voltage 12 VDC 24 VDC 12 VDC 24 VDC G3 G3DZ-F4B Model G6 G6D-F4B Terminals Phillips head screw s ead sc e terminal t il Relay ou u e ay output Power MOS FET relay o e OS e ay output tt Note: When ordering add the rated coil voltage to the model number. Example: G6D-F4B 24 VDC Rated coil voltage Accessories (Order Separately) Replacement Relays Applicable Terminal Relay G6 G6D-F4B 12 VDC 24 VDC 12 VDC 24 VDC G3 G3DZ-F4B 12 VDC 24 VDC Note: Error rate (P level) for the G6D-1A is 5 V at 10 mA and that for the G6D-1A-AP is 5 V at 1 mA. G3 G3DZ-2R6PL 6 G6D-1A-AP (see note) G6 o e) Rated voltage Model G6 G6D-1A (see note) o e) Short Bar Applicable Terminal Relay G6D-F4B G3DZ-F4B G6D-4-SB Model 1 G6D-F4B/G3DZ-F4B G6D-F4B/G3DZ-F4B Specifications Ratings Coil Ratings (per G6D Relay) Rated voltage 12 VDC 24 VDC Note: Rated current 18. 7 mA 10. 5 mA Coil resistance 720 2, 880 Must operate voltage 70% max. [. . . ] (3 A at 30 VDC, resistive load) (at 1, 800 operations /hr) Ambient temperature Ambient humidity Weight Note: Operating: ­25°C to 55°C (with no icing) Storage: ­25°C to 55°C (with no icing) Operating: 45% to 85% Approx. Ambient temperature condition: 23°C Item e G3DZ-F4B Power MOS FET relay output 10 ms max. (at 500 VDC) 2, 000 VAC, 50/60 Hz for 1 min between input and output terminals 10 to 55 Hz, 1. 5-mm double amplitude 500 m/s2 Operating: ­25°C to 55°C (with no icing) Storage: ­25°C to 55°C (with no icing) Operating: 45% to 85% Approx. 65 g Must operate time Release time Output ON-resistance Leakage current at OFF state Insulation resistance Dielectric strength Vibration resistance Shock resistance Ambient temperature Ambient humidity Weight 3 G6D-F4B/G3DZ-F4B G6D-F4B/G3DZ-F4B Engineering Data G6D-F4B Max. Switching Capacity Life Expectancy Life expectance (x10 4 operations) Switching current (A) 250 VAC/30 VDC resistive load DC resistive load AC resistive load Switching voltage (V) Switching current (A) G3DZ-F4B Load Current vs. Ambient Temperature Characteristics Inrush Current Resistivity Non-repetitive (Keep the inrush current to half the rated value if it occurs repetitively. ) Inrush current (A. Peak) Load current (A) Ambient temperature (°C) Energizing time (ms) 4 G6D-F4B/G3DZ-F4B G6D-F4B/G3DZ-F4B Dimensions Note: All units are in millimeters unless otherwise indicated. G6D-F4B G3DZ-F4B Mounting Dimensions 16, M3 Phillips head screws Two, 4 dia. or M3. 5 holes Terminal Arrangement/ Internal Connections (Top View) Input side 68 max. Output side 31 max. 35 max. Note: Make sure that the polarity of the coil is correct. Accessories G6D-4-SB Short Bar Applicable model G6D-F4B G3DZ-F4B Model G6 G6D-4-SB S 5 G6D-F4B/G3DZ-F4B G6D-F4B/G3DZ-F4B Precautions Wiring Be sure to turn OFF the power when wiring the Unit and do not touch the charged terminals of the Unit. Otherwise, an electric shock may result. Do not apply overvoltage to the input terminals. Otherwise, the Unit may malfunction or burn. Coil Voltage Make sure not to impose voltage exceeding the permissible voltage on the coil continuously. Do not connect any inductive load in parallel to the coil input as shown in the following example or power supply with a surge voltage. Otherwise, the surge absorption diode will be damaged. Do Not Use the Following Circuit Relay Models Do not connect the Unit to loads exceeding the rated switching capacity (switching voltage or current). Otherwise, faulty insulation, contact weld, or faulty contact of Relays, or damage to Relays may result, or the Relays may malfunction or burn. The life of Relays varies with the switching condition. Test the Relays under the actual operating conditions before using the Relays within the permissible switching frequency. The use of deteriorated Relays may result in the faulty insulation of the Relays or cause the Relays to burn. Do not use the Unit in locations with inflammable gas. Otherwise, a fire or explosion due to the heat of the Relays or sparks from the Relays may result when they are switched. Inductive load G6D coil Coil surge absorption diode Handling Do not drop, shock, or vibrate the Unit excessively. [. . . ] Be sure to turn OFF the power to the Unit before replacing a Relay. When mounting a Relay, insert the Relay vertically so that the relay terminals will come in contact with the socket contact pins properly. Do not mount Relays that are different to one another in voltage. Disassembly, Repair, and Modification Do not disassemble, repair, or modify the Unit. Otherwise, an electric shock may result or the Unit may malfunction. Wiring Pay utmost attention not to make mistakes with the polarity of the input terminals. 6 G6D-F4B/G3DZ-F4B G6D-F4B/G3DZ-F4B 7 G6D-F4B/G3DZ-F4B G6D-F4B/G3DZ-F4B ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0. 03937. [. . . ]