User manual OMRON HJ-151

[. . . ] Keep the unit out of the reach of young children. The unit contains small pieces that may be swallowed. Immediately contact your physician if any piece is swallowed. Read all information in the instruction book and any other literature included in the box before using the unit. [. . . ] It does not display the step count for the first four seconds of walking. If you continue walking for more than four seconds, it displays the step count for the first four seconds and then continues to count. · Standing up and/or sitting down movement · Taking part in sports other than walking · Ascending or descending movement on stairs or on a steep slope 4. Vibrations from a moving vehicle · Such as riding a bicycle, automobile, train or bus 5. Extremely slow walking 12 13 CHANGING THE DISPLAY Press the MODE Button to change the display. Each time you press the MODE Button, the display will change. Number of moderate steps with minutes USING THE MEMORY FUNCTION This unit can store and display up to seven days of previous data. The current day's data is automatically stored in memory when the time reaches 12:00AM. NOTE: The time must be correctly set in the unit. Distance Number of steps Calories How to view data stored in the memory Press the MODE Button until the data you want to see is displayed: · Steps · Moderate steps with minutes · Calories · Distance Press the MEMO Button. The previous day's data is displayed. Continue to press the MEMO Button to display all seven days of data. BATTERY SAVING MODE After 5 minutes with no button being pressed, the display will automatically turn off. However, the unit continues measuring steps. Press the MEMO or MODE Button to activate the display again. NOTE: If no button is pressed for more than 1 minute, the display will return to the current day's data. Press the MODE Button to return to the current day's data. 14 15 USING THE SYSTEM RESET FUNCTION Use the SYSTEM RESET function in the following cases: · When the display becomes unrecognizable · When you want to delete all data Press the SYSTEM RESET Button on the back of the unit. All the data in memory is deleted and settings return to default values. To reset the time, height and weight refer to "Setting the Time" on page 8. BATTERY INSTALLATION The battery is installed in the pedometer when this unit is purchased. Low Battery Indicator When the Low Battery Indicator appears on the display, immediately replace the battery with a new CR2032 battery. When the battery is removed from the unit the settings and all data stored in the memory will be erased. Be sure to write important data stored in the memory in a notebook. 1. Remove the screws on the battery cover located on the back of the unit. Use a small screwdriver to remove the screws on the battery cover. 2. Remove the battery cover. 16 17 Care and Maintenance BATTERY INSTALLATION 3. Remove the old battery. Take the battery out with a thin stick that is not easily breakable. NOTE: · DO NOT use a pair of metal tweezers or a screwdriver. CAUTION Dispose of the device, battery, and components according to applicable local regulations. Unlawful disposal be cause environmental pollution. [. . . ] Include a letter, with your name, address, phone number, and description of the specific problem. Pack the product carefully to prevent damage in transit. Because of possible loss in transit, we recommend insuring the product with return receipt requested. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THE APPLICABLE WRITTEN WARRANTY ABOVE. [. . . ]