User manual OMRON MK-S DATASHEET

[. . . ] · Standard models are UL, CSA, SEV, DEMKO, NEMKO, SEMKO, TÜV (IEC), and VDE. · Conforming to CENELEC standards. Model Number Structure Model Number Legend Standard Models MK 1 2 3 4 5 6 1. Internal Connection Construction Blank: Standard 2 or 5: Non-standard connection (Refer to Terminal Arrangement/ Internal Connections) 4. [. . . ] This DC coil comes in two types: standard coil polarity and reversed coil polarity. Refer to Terminal Arrangement/Internal Connections. Example: MK2PN1-I 24 VDC Reverse polarity 3. Refer to Terminal Arrangement/Internal Connections for non-standard internal connection. The gold plating thickness depends on the request. Example: MK3P-I AP3 24 VAC Gold plating thickness: 3 µm Accessories (Order Separately) Item Track-mounted Socket Hold-down Clip 8-pin type 11-pin type Model PF083A-E PF113A-E PFC-A1 A-46 General-purpose Relay MK-I/-S Specifications Coil Ratings UL, CSA, DEMKO, NEMKO, SEMKO, SEV, TÜV Rated voltage AC (~) 6V 12 V 24 V 50 V 100 V 110 V 120 V 200 V 220 V 230 V 240 V DC (=) 6V 12 V 24 V 48 V 100 V 110 V Rated current 60 Hz 360 mA 180 mA 88. 0 mA 39. 0 mA 24. 8 mA 21. 0 mA 18. 0 mA 12. 1 mA 11. 0 mA 10. 5 mA 9. 2 mA 255 mA 126 mA 56 mA 29. 5 mA 14. 7 mA 15. 1 mA 50 Hz 404 mA 202 mA 98. 0 mA 46. 3 mA 28. 4 mA 24. 7 mA 20. 2 mA 14. 2 mA 12. 9 mA 12. 3 mA 10. 3 mA 3. 9 16. 9 62. 0 330 1, 010 1, 240 1, 520 4, 520 5, 130 6, 170 6, 450 23. 5 95 430 1, 630 6, 800 7, 300 15% min. 1. 5 W Coil resistance Must operate voltage Must release voltage Max. of rated 90% to110% of voltage voltage rated voltage VDE Rated voltage AC (~) 6V 12 V 24 V 50 V 100 V 110 V 120 V 200 V 220 V 230 V 240 V DC (=) 6V 12 V 24 V 48 V 100 V 110 V Rated current 50 Hz 380 mA 175 mA 91. 0 mA 42. 0 mA 24. 0 mA 21. 5 mA 20. 0 mA 11. 2 mA 10. 2 mA 9. 6 mA 9. 4 mA 225 mA 116 mA 56. 0 mA 29. 0 mA 13. 1 mA 12. 5 mA 60 Hz 325 mA 145 mA 76. 5 mA 36. 0 mA 20. 5 mA 18. 0 mA 17. 0 mA 9. 4 mA 8. 7 mA 8. 1 mA 7. 9 mA 4. 4 19. 0 70. 7 330 1, 150 1, 400 1, 600 5, 110 5, 800 6, 990 7, 400 26. 7 107 440 1, 660 7, 660 8, 720 15% min. 1. 3 W Coil resistance Must operate voltage Must release voltage Max. of rated 90% to110% of voltage voltage rated voltage Note: 1. The rated current and coil resistance are measured at a coil temperature of 23°C with tolerances of +15%/-20% for AC rated current and ±15% for DC coil resistance. Performance characteristic data are measured at a coil temperature of 23°C. ~ indicates AC and = indicates DC (IEC417 publications). For 200 VDC applications, a 100-VDC Relay is supplied with a fixed 6. 8 k, 30 W resistor. Be sure to connect the resistor in series with the coil. For models with the LED indicator built in, add an LED current of approximately 0 through 5 mA to the rated current. General-purpose Relay MK-I/-S A-47 Electromechanical Relays Contact Ratings Load Contact mechanism Contact material Rated load Rated carry current Max. switching power Resistive load (cos = 1) Single Ag 10 A at 250 VAC 10A at 28 VDC 10 A 250 VAC, 250 VDC 10 A 2, 500 VA, 280 W 1, 750 VA 7 A at 250 VAC Inductive load (cos = 0. 4) Characteristics Contact resistance Operate time Release time Max. operating frequency Insulation resistance Dielectric strength 50 m max. [. . . ] Use Y-shaped terminals. PF083A-E (Conforming to EN 50022) Terminal Arrangement Eight, M3. 5 x 7 sems 7 4 Two, M4 or two 4. 5-dia. 35. 4 33±0. 2 Mounting Holes 33 41 max. 3. 5 2 21 max. PF113A-E (Conforming to EN 50022) Eleven, M3. 5 x 7 sems 7 4 Two, M4 or two 4. 5-dia. To convert millimeters into inches, multiply by 0. 03937. [. . . ]