User manual OMRON NT-SERIES SUPPORT TOOL FOR WINDOWS V4

[. . . ] V061-E1-06 NT-Series Support Tool for Windows Ver. 4. OPERATION MANUAL NT-series Support Tool for Windows Ver. 4. j Operation Manual Revised July 2010 iv Introduction The NT-series Support Tool for Windows (Ver. 4. j) is a software package for creating and maintaining screen data used by OMRON Programmable Terminals. Be sure to read and understand the functions and performance of the Support Tool before you attempt to use a Programmable Terminal. When using the Support Tool, be sure to have the manuals for the Programmable Terminal close at hand. Intended Audience This manual is intended for the following personnel, who must also have knowledge of electrical systems (an electrical engineer or the equivalent) and computers. [. . . ] (Registered symbol will be discarded. ) For details on saving, refer to Saving a folder (file) on page 258. Creating a new folder Create a new folder to register the symbol data by the procedure shown below. By collecting symbols related with each other in the same folder, the screen data creation operation can be facilitated since searching for symbol data is simple. Select [File] in the menu bar, then select [New]. 256 Registering Created Elements (Symbol Manager Operation) A new folder is named as "No description. " Section 6-10 S Changing folder name To change the folder name to one that is easy to understand, follow the operation shown below. (1) Select the folder name that should be changed. The folder name is displayed in reverse video. (2) Select [Edit] in the menu bar, then select [Change Label]. The label name change dialog box is displayed. (3) Set the desired folder name and click the Button. Registering the symbol data A graphic consisting of several elements is registered as a single element (symbol). After registering the symbol data, be sure to perform the file save operation. To register the symbol data, select the elements to be registered collectively and drag them to the symbol manager folder where they are to be registered. Drag the symbol to the desired folder, then release the mouse. The element in the source screen remains as it is. For a new symbol, symbol name "New Symbol x" (x is a serial number) is assigned. Reference: The symbol data can be registered also by the following operation. (1) Select the elements to be registered in the source screen and select [Copy] or [Cut] from the [Edit] menu in the Support Tool. (2) Select [Paste] from the [Edit] menu in the symbol manager. 257 Registering Created Elements (Symbol Manager Operation) Section 6-10 In this case, symbol name "Pasted Symbol x" (x is a serial number) is assigned for a new symbol. S Changing the symbol name To change the symbol name to the one easy to understand, follow the operation shown below. (1) Select the symbol name that should be changed. The symbol name is displayed in reverse video. (2) Select [Edit] in the menu bar, then select [Change Label]. The label name change dialog box is displayed. (3) Set your desired symbol name and click the Button. S Changing the symbol icon It is possible to change the icon of the symbol data to a desired one. To change the icon, follow the procedure shown below. [. . . ] MS-DOS CP437 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 [] 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 Destination No. Windows ISO8859/1 [] 187 [?] 063 [?] 063 [?] 063 [?] 063 [?] 063 [?] 063 [?] 063 [?] 063 [?] 063 [?] 063 [?] 063 [?] 063 [?] 063 [?] 063 [?] 063 [?] 063 [?] 063 [?] 063 [?] 063 [?] 063 [?] 063 [?] 063 [?] 063 [?] 063 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 Source MS-DOS CP437 200 201 ] 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 [] 224 Destination Windows ISO8859/1 [?] 063 [?] 063 [?] 063 [?] 063 [?] 063 [?] 063 [?] 063 [?] 063 [?] 063 [?] 063 [?] 063 [?] 063 [?] 063 [?] 063 [?] 063 [?] 063 [?] 063 [?] 063 [?] 063 [?] 063 [?] 063 [?] 063 [?] 063 [?] 063 [?] 063 566 Keycode Tables and Conversion Rule Source No. MS-DOS CP437 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 [] 225 [] 226 [] 227 [] 228 [] 229 [] 230 [] 231 [] 232 [] 233 [] 234 [] 235 [] 236 [] 237 [] 238 [] 239 [] 240 Windows ISO8859/1 [B] 223 [?] 063 [?] 063 [?] 063 [?] 063 [] 181 [?] 063 [?] 063 [?] 063 [?] 063 [?] 063 [?] 063 [] 248 [?] 063 [?] 063 [?] 063 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 Destination No. MS-DOS CP437 [] 241 [] 242 [] 243 [] 244 [] 245 [] 246 [] 247 [] 248 [] 249 [] 250 [3] 251 [n] 252 [2] 253 Appendix N Source Destination Windows ISO8859/1 [] 177 [?] 063 [?] 063 [?] 063 [?] 063 [] 247 [?] 063 [] 176 [Space] 149 [] 183 [?] 063 [?] 063 [2] 178 [?] 063 "Space" 160 [J] 254 Not Used 255 567 Index Symbols [Help] Menu, 76 [Show Window/Keyboard], 87 child screen, 92, 93 [Circle], 142 [Clip], 335 Closing a Creation Screen, 67 Color Palette Symbol, 260 Colour, 82 Comment, 81 [Comms. [. . . ]