User manual OMRON NT2S-SF122B-E QUICK START V1.03

[. . . ] NT2S-SF121B-E & NT2S-SF122B-E QUICK START GUIDE - V1. 03 Version 1. 03 Page 1 NT2ST QUICK START GUIDE 1. INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 NT2S OPERATION OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 NT2ST SOFTWARE OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Use the following steps to create a tag for a coil: 1. PRINT ­ Selection box that allows the NT2S screen data to print out the top serial port. MIN TIME ­ A minimum time can be assigned to assure an operator can view the screen. If a number is entered in this field, screens will display for the specified minimum time. This is useful when displaying chained messages, confirming function key action, or displaying alarm/error messages. CHAIN TO ­ If a screen number is placed in this box, the current screen will be displayed following the specified screen. The screens in a "chain" will each display for the specified time in the MIN TIME box. Version 1. 03 Page 11 EMBED BIT TEXT ­ This selection button launches an editing window where letters are assigned to bit values. Once the text is assigned to bit values and OK is selected, text placeholders will appear in the display window. These placeholders can be positioned by adding characters before the placeholders. In this case, spaces were added at the far left of the second line to center the text. The Embedded Bit Text can be edited by selecting a placeholder in the NT2S display window. Choose EDIT from the menu that will be presented. A DELETE selection will also be presented. Multiple Bit Text elements can be placed on a single NT2S screen. The program will allow up to 32 single character bit text messages per screen. It is also possible to have one of the states, On or Off, to have no text displayed. Version 1. 03 Page 12 EMBED REGISTER ­ This selection button launches an editing window for specifying numeric data display. This editing window allows the selection of data TAG, type, and format. Once the register is assigned and formatted, select OK. Text placeholders will appear in the display window at the cursor location. These placeholders can be positioned by adding characters before the placeholders. The Embedded Register can be edited by selecting a placeholder in the NT2S display window. Choose EDIT from the menu that will be presented. A DELETE selection will also be presented. Version 1. 03 Page 13 KEYS FOR SCREEN ­ The buttons shown in the lower right hand side of the screen dialog are for editing the function keys for that screen. This would be considered local programming for function keys, effective only for the current screen number. Global programming must be performed by creating a Function Key screen, or using the Edit menu, Function Keys. Double click on the red key to program, or green keys to change programming. [. . . ] NT2S SPECIFICATIONS Features Programming package ASCII Controlled Messages Description NT2S-SF121B-E NT2S-SF122B-E Yes No Windows Software Package - NT2ST Yes ASCII in PLC registers is displayed on the NT2S screen. Pointer in PLC No memory tells NT2S which register to display. Pointers placed in that PLC register point to data value to be displayed. Omron, Allen-Bradley Micrologix and SLC 5/0x, GE Micro, Modicon, Keyence KV Series, Toshiba T Series, Koyo 305, 405, and DL205 Series. [. . . ]