User manual OMRON NTXS

[. . . ] V03E-EN-02 NTXS Programmable Terminals USER´S MANUAL Preliminary Thank you for purchasing NTXS Series product from Omron. NTXS Series Products are versatile operator interfaces with Microsoft Windows® based configuration Software. This manual will help you to safely install, configure and operate NTXS Products. All the safety warnings and precautions must be followed to ensure proper unit performance and personal safety. Warnings used in this manual: DANGER Danger Warnings are used to indicate situations, ocations and conditions that can cause serious injury or death. CAUTION ! Caution Warnings are used to indicate situations and conditions that can cause operator injury and/or unit damage. If additional information or technical assistance is needed please contact: Omron Europe B. V. [. . . ] Each bargraph can be configured with individual colors and limit values. To draw the object, click on the Multiple Bargraph button. Place the tool on the screen and select the number of bars. The style and width for all bars can be specified. Individual bar properties are set for the bar tag, color, as well as the Maximum and Minimum limits. 87 Representing Data Bargraph Properties Number of bars Enter or select the number of bars you want in a single wizard. Up to four bargraphs can be defined in a single wizard. Background color This is the background color for the entire bargraph object. Gap width The Gap Width is the space, in pixels, between any two bars. Bar width The designer can specify the bar width, in pixels, for all bars. The maximum is 25 pixels. 88 Representing Data Style A multiple bargraph object can have any of four different styles. Simulate The designer can preview the bargraph by entering suitable values in the corresponding simulate value field. Changing the "Language" displays the text associated with each language. General Attributes 89 Representing Data Label selection If the "Label" checkbox is enabled, the designer can specify the following label parameters: 1. Up to 14 characters of text can be specified for the label. Specify the Windows® Font , Font Style and Font size desired. Displays the list of languages depending upon number of languages configured in the Unit settings. Selects the background color of the text. If the "Top" option is selected, the label is shown above the bargraph. If the "Bottom" option is selected, the label is shown below the bargraph. 4. Label position : Border If the "Border" option is enabled, the bargraph is shown with a border. Data Type User can have tags of following data types representing values of bargraph : 1. Float Simulate The designer can simulate the label text of various languages configured in the wizard, and can see a preview in the preview window. 90 Representing Data Axis Axis properties User can enable or disable axis by clicking on the "Axis" option. [. . . ] Also take care that the LCD window does not come in contact with the material that has an abrasive surface. Do not use benzene, paint thinner or other volatile solvents. Do not use any chemically treated cloth, wipes, or rags. Make sure the panel is not dirty or warped and that it is strong enough to hold the unit. [. . . ]