User manual ONE FOR ALL SV 1716

[. . . ] The AV Sender gives you the possibility to view any video source (satellite receiver, video recorder, camcorder, DVD player, digital or analogue Set-Top Box or Pay-TV decoder box) on your second TV in your home. The One For All AV Sender (SV-1716) package contains: TRANSMITTER unit RECEIVER unit Remote Control Extender Eye Infra-red (IR) Eye Two Power adapters The TRANSMITTER sends the audio and video signals from the source device (VCR, DVD, SATELLITE/ CABLE BOX, CAMCORDER, etc) by 2. 4 GHz to the RECEIVER that is connected to the destination device. The Remote Control Extender sends the IR signal in the opposite direction (from RECEIVER unit to TRANSMITTER unit) at a frequency of 433. 92 MHz. TRANSMITTER unit The TRANSMITTER operates on 9 Volts DC 300mA that is supplied by the AC/DC Adapter (included in package). The Audio and/or video signals are transformed to a 2. 4GHz frequency that will be sent via the built-in antenna. [. . . ] Place the IR eye on / in front of the IR receiver of the VCR. Select the mode on the TV for "Line In" (AV, EXT or channel 0). You can take the remote of your VCR to your bedroom to control your TV channels tuned in your VCR. EXAMPLE 3: Also, if you do not have coax cable connection with the TV in the bedroom, the AV Sender gives the possibility to view your Satellite Receiver (source) programs also on the TV (destination) in the bedroom. You probably already tuned in the channels on your Satellite Receiver. If not, you may need the manual of your Satellite Receiver to tune in the TV channels. Once all channels are tuned in, you are able to watch your TV channels through your AV channel (or other output channel). Connect the TRANSMITTER to the Satellite Receiver and the RECEIVER to the TV in the bedroom. Place the IR eye on / in front of the IR receiver of the Satellite Receiver. Select the mode on the TV for "Line In" (AV, EXT or channel 0). You can take the remote of your Satellite Receiver to your bedroom to control your TV channels tuned in your Satellite Receiver. 6 WWW. ONEFORALL. COM Trouble Shooting Problem & Solution If your house has a heavy metal construction or is equipped with a PC network, it can disturb the radio signal. Even moving the units a few inches can improve the performance. If this doesn't work try to move the TRANSMITTER and RECEIVER to another place in the house. If you experience problems, try placing the units away from electrical appliances. - Make sure that the TRANSMITTER and RECEIVER are switched ON. - Make sure that both TRANSMITTER UNIT and RECEIVER UNIT are set to the same channel. - Select "EXT" or "AV" on second TV. - Make sure that all cables are connected correctly. - Make sure that the video source (satellite receiver, video recorder, camcorder, DVD player, digital or analogue Set-Top Box or Pay-TV decoder box) is switched on. - Make sure to use the correct SCART connector (e. g. EXT1 or EXT2) of the video source (check manual of video source). · Bad picture/ sound quality on second TV. - Try to find out if the way the cables are placed cause interference. [. . . ] Bennett As Managing Director of Universal Electronics BV Guarantee English UNIVERSAL ELECTRONICS / ONE FOR ALL warrants to the original purchaser that this product will be free from defects in materials and workmanship under normal and correct use for a period of one (1) year from the date of original purchase. This product will be repaired or if necessary replaced free of charge if it has been proven to be defective within the one (1) year warranty period. The forwarding costs are on the account of the owner; the costs of returning the product are on the account of UNIVERSAL ELECTRONICS / ONE FOR ALL. This warranty does not cover damage or failures caused by products or services not supplied by UNIVERSAL ELECTRONICS / ONE FOR ALL, or which result from not mounting the product according to manual instructions. [. . . ]