User manual ONE FOR ALL URC-6510

[. . . ] A) Try all the codes listed for your brand. Try the search method. Thank you for purchasing the ZAPPER universal remote control (URC-6510). Your ZAPPER package contains: The ZAPPER Remote Control The ZAPPER User Guide & Code Book The User Guide & Code Book explains in simple steps how to set up and operate your new universal remote control. You may need this guide again in the future, so please be sure to keep it. [. . . ] They operate just as those on your original remote control. These keys are also used to program the ZAPPER for your devices and to control the Colour and Brightness settings of your television (Advanced Operation). Volume - Volume + Mute/Scan Programme - Important notes: - Some codes are quite similar. If your television does not respond or is not functioning properly with one of the codes, follow steps 1-6 with each code listed for your brand. - If none of the codes listed for your brand operate your television, follow the Search Method described in the next section. The Search Method can be used even if your brand is not listed at all. - Write the code for your TV in the boxes provided below and inside the battery compartment for easy future reference. Advanced Operation Controlling Colour & Brightness Depending on the functions of your original remote control, the ZAPPER can operate the colour and brightness settings of your Television. Colour up = Press then hold If you have any questions about the operation of your new ONE FOR ALL Universal Remote Control, you may call our consumer helpline for assistance. Before calling, please read this manual carefully to find the answer to your question. If you cannot find a solution in this manual, we ask that you complete the chart below on your television before calling. Please ensure you have this information ready upon speaking to our customer service department even if done via fax or e-mail. In the UK: Colour down = Press then hold phone: 0800 966 194 fax: +31 53 432 9816 e-mail: ofahelp@ueic. com Hours: 9 am - 7 pm Mon-Fri / 9 am - 3 pm Sat phone: 1-800 553 118 fax: +31 53 432 9816 e-mail: ofahelp@ueic. com Hours: 9 am - 7 pm Mon-Fri / 9 am - 3 pm Sat phone: 1-800 064 472 e-mail: ofahelp@ueic. com TV Code sssss Installing The Batteries The ZAPPER needs 2 new "AAA/LRO3" alkaline batteries. Searching for Your Code If your Television does not respond to the ZAPPER after trying all the codes listed for your brand, try searching for your code. To search for your TV code: Brightness up = Press then hold In Ireland: Brightness down) = Press then hold In Australia: 1 Remove the battery cover from the back of the ZAPPER by pressing down on the tab. 1 2 3 4 Turn on your TV and aim your ONE FOR ALL at your television. Press and hold the MAGIC key until the light blinks twice (the light will blink once then twice). x3 Next, press the Programme(-) key three times. Scan Your ZAPPER comes with a special Scan function which lets you "scan" through every programme available on your TV. To scan the programmes on your TV: Contents ABOUT YOUR ZAPPER Features and Functions INSTALLING THE BATTERIES SETTING UP THE ZAPPER Direct Set-Up Search Method ADVANCED OPERATION Controlling Colour & Brightness Scan TROUBLE-SHOOTING Helpful Hints Consumer Help-Line SET-UP CODES Quick Set-Up Codes Front Page Front Page Front Page Front Page Front Page 2 Match the batteries to the +/- marks inside the battery case, then insert the batteries. We need to know: - Your ONE FOR ALL model number: URC-6510 - Date of purchase: - Your Television: day/month/year day/month/year 3 Press the battery cover back into place. Next, alternate between Programme(-) and POWER until your Television turns off. You may have to press these keys many times, so be patient. Remember, you must aim the ZAPPER at your device the entire time you are searching for your code. When your device turns off, press and release MAGIC. Don't forget, press MAGIC as soon as your device turns off. The ZAPPER should now be ready to operate your Television. Turn your device back on and try all the remote's functions to ensure they are working properly. If some of the ZAPPER'S commands are not operating correctly, try the search method again, you may be using the wrong code. 1 Aim the ZAPPER at your TV. [. . . ] Blackrock, County Dublin In Australia: KENMARK INDUSTRIAL (A) CO. PTY. LTD. 106 Mitchell Street Maidstone vic 3012 24422 21244 14121 22142 24333 31431 13314 14233 14232 24422 21244 21123 11322 13314 11322 24413 12133 12132 24242 21114 24224 12322 22224 14233 14424 22212 11322 21214 14143 22242 14231 14233 11322 14232 22111 11132 12332 22414 22432 14424 22423 23144 24224 14342 31431 12132 12133 31111 11322 14232 11314 11132 12342 24422 22144 14121 22224 11322 13443 24414 22324 24111 22423 24111 14343 12331 22423 22212 11314 24441 14414 11321 12323 23442 12323 14232 14112 31121 22233 31341 11322 11432 14143 21344 22423 23313 IMPORTANT: IF THE UNIT IS RETURNED WITHIN THE WARRANTY PERIOD, YOU MUST INCLUDE YOUR PURCHASE RECEIPT so that we may establish your eligibility for service and can replace your unit without cost. It would be helpful if you included a note detailing the problem. IF THE UNIT IS RETURNED FOR SERVICE OUTSIDE THE WARRANTY PERIOD, please include a cheque to cover the cost of replacement, handling and return postage. [. . . ]