User manual ONE FOR ALL URC 7562

[. . . ] URC-7562 701922 UK D F Universal remote ZAPP ONE Table of Contents PICTURE OF ONE FOR ALL 6 REMOTE INSTALLING THE BATTERIES THE KEYPAD INSTALLATION Setting up your devices The Search Method CHANGING A DEVICE KEY QUICK CODE REFERENCE ADVANCED FEATURES Colour and Brightness Volume Punch-Through Auto Scan Favourite Programme Scan Device Sleeptimer ONE FOR ALL Sleeptimer Macros The Learning Feature Home Theater Key Magic Telephone Upgradable Technology / Internet Download TROUBLE-SHOOTING Helpful Hints Customer Service UK 3 4 4 6 7 8 8 9 9 9 10 11 11 12 13 15 17 18 19 20 About Your ONE FOR ALL 6 Your ONE FOR ALL 6 Package contains: · Your ONE FOR ALL 6 Remote · Your ONE FOR ALL 6 Manual · Your ONE FOR ALL 6 Codelist You may need this guide again in the future, so please be sure to keep it. Your ONE FOR ALL 6 needs 2 new "AA/LR6" batteries. Your ONE FOR ALL 6 is designed to let you use one remote to operate your Video and Audio equipment; any device designed to be operated by an infrared signal. This also includes those devices, which operate over 100 kHz. [. . . ] - To avoid accidental recordings with the ONE FOR ALL 6, you must press the Record key twice to begin recording. Because of this, you cannot assign a Macro or Shifted Macro to the Record key. - If you had to hold down a key for a few seconds on the original remote control to get a function, this function may not work in a macro on your ONE FOR ALL remote. - If a Shifted Macro is placed on the Mute, Channel and Volume keys then Scan and Colour/Brightness will be sacrificed. 12 WWW. ONEFORALL. COM The Learning Feature The ONE FOR ALL 6 comes with a complete library of preprogrammed codes. After you have set up the ONE FOR ALL 6 for your device, you may find that there are one or more keys that you had on your original remote, which do not have a place on the ONE FOR ALL keypad. As a convenience, the ONE FOR ALL 6 offers a special Learning feature that allows you to copy any function from your original remote control onto the keypad of the ONE FOR ALL 6. To use the Learning feature, please follow the instructions below. Please note, the "custom keys" A-H have been especially provided for this feature. By using these keys, you will not have to sacrifice an existing function on the ONE FOR ALL 6 keypad. (If you need to learn more than eight features per mode (max. approximately 25 functions), you will need to place the learned function on another key. Please see the next section entitled Shifted Learning). Before you start: - Make sure your original remote control is working correctly. - Make sure neither your ONE FOR ALL, nor your original remote control is pointing at your device. Example: To copy the "mono/stereo" function from your original TV remote onto the A-key of your ONE FOR ALL 6. 1 Place both remote controls (the ONE FOR ALL 6 and your original) on a flat surface. Make sure the ends which you normally point at your device are facing each other. Keep the remotes at a distance of 2 to 5 cm. 2 3 4 TV Press and hold the MAGIC key until the device key blinks twice (the device key blinks once then twice). Press 975 (the device key will blink twice). Press the device key (on the ONE FOR ALL remote) to select the mode to which you want to copy the learned function (Example: TV key). Press the key (on the ONE FOR ALL remote) where you want to place the learned function (Example: A key). Press and hold the key (on your original remote) that you want to copy until the device key on the ONE FOR ALL blinks twice (Example: "mono/stereo" key). [. . . ] *Virker ikke på alle modeller i LX, MX og LS serien. * Ekskluderer enkelte modeller i LX, MX og LS serien. * Fungerar ej på vissa LX-, MX- och LS-modeller * Ei koste joitakin LX-, MX-ja LS-sarjojen malleja WWW. ONEFORALL. COM 15 BskyB Functions on the BskyB remote control Standby 0 1 2 3 4 5 6 7 8 9 Program (+) Program (-) Volume (+) Volume (-) Mute Guide Services Info Interactive Up Down Left Right Select TV Text Red Blue Yellow Green Backup Sky digibox SAT code 0847 for Amstrad, Grundig, Pace, Panasonic Placement of the functions on the ONE FOR ALL remote control Standby 0 1 2 3 4 5 6 7 8 9 PROGRAM (+) PROGRAM (-) VOLUME (+) VOLUME (-) MUTE MENU PLAY PAUSE FAST FORWARD UP DOWN LEFT RIGHT MUTE (When in Menu) AV (When in Menu) REWIND SP/LP AUTO RECORD STOP 10 On Digital SAT code 0241 for: Pace SAT code 0133 and 0134 for: Philips Functions on the Pace or Philips or. . . remote control Standby 0 1 2 3 4 5 6 7 8 9 Program (+) Program (-) Volume (+) Volume (-) Mute Guide Menu Info Cursor Up Cursor Down Cursor Left Cursor Right Select Exit TV/DTV Text Red Blue Yellow Green Wide Placement of the functions on the ONE FOR ALL remote control Standby 0 1 2 3 4 5 6 7 8 9 PROGRAM (+) PROGRAM (-) VOLUME (+) VOLUME (-) MUTE MENU PLAY PAUSE UP DOWN LEFT RIGHT MUTE (When in Menu) AV (When in Menu) AV REWIND SP/LP AUTO RECORD STOP 10 WWW. ONEFORALL. COM 16 Information Canal Sat et TPS Pour retrouver l'emplacement des fonctions d'appareil TPS ou Canal Satellite sur les touches de la télécommande universelle ONE FOR ALL, veuillez vous référer aux tableaux ci-dessous. [. . . ]