User manual ONE FOR ALL URC-7710

[. . . ] Your ONE FOR ALL 1 Remote Package contains: · Your ONE FOR ALL 1 Remote · Your ONE FOR ALL 1 Manual Your Manual is divided into two parts: the set-up instructions and the device codes. PLEASE DO NOT DISCARD THIS MANUAL AS YOU MAY NEED IT AGAIN IN THE FUTURE!Your ONE FOR ALL 1 can operate a Television. 2 WWW. ONEFORALL. COM 2 1 3 4 5 6 8 7 9 10 11 12 14 13 WWW. ONEFORALL. COM 3 Batteries Your ONE FOR ALL 1 Remote needs 2 new "AA/LR6" Alkaline batteries. Push the battery door upwards and lift it up to remove it. [. . . ] Switches the television back to regular viewing mode. On some televisions, this may be done by pressing the TEXT key several times. 14 TEXT OFF: When accessing the text mode, the keys marked red, green, yellow and blue, allow you to access the Fastext functions of your television. If on your original remote control these keys are used for Menu navigation, the ONE FOR ALL Fastext keys may operate in the same way. - For a more detailed explanation of the Teletext and Fastext functions, please refer to the manual of your television. Remember, different televisions control Teletext and Fastext in different ways. Not all Teletext functions may be available for your particular model. WWW. ONEFORALL. COM 5 Setting up the ONE FOR ALL 1 (How to set-up the ONE FOR ALL 1 to control your television) Direct code set-up To set up the ONE FOR ALL 1 for your television: 1. 2. Make sure your device (television) you wish to operate is switched on (not in standby). A FOR ONE Acura al Admir n Adyso Agazi AGB Agef Aiko 3, 041 0009 0093, 036 0087, 0216 0217, 0264 0516 7, 0087 0009, 003 0216, 0274 1 0037, 0208, 037 0361, Find the code for your device in the Code List (page 10 - 14). The device codes are listed per brand name. Also the most popular code for each brand is listed first. If your brand is not listed at all, try the Search Method on page 7. Press and hold down MAGIC until the red light blinks twice (the red light will blink once then twice). 3. 5. ____ Enter your four-digit device code using the number keys. Now aim the ONE FOR ALL 1 remote at your device (television) and press POWER. If your device switched off, the ONE FOR ALL 1 is ready to operate your device. - Most TV's do not switch back on pressing the POWER key, please try pressing a "number" key or the "TV-text off" key to switch your TV back on. - If your device does not respond, follow steps 1 through 5 with each code listed for your brand. If none of the codes listed for your brand operate your device, then try the Search Method described on page 7, even if your brand is not listed at all. If your device does not respond or is not functioning properly with one of the codes, try another code listed under your brand. - Write your device code in the applicable four digit boxes provided in the battery compartment and on page 8 for future reference. 6 WWW. ONEFORALL. COM Setting up the ONE FOR ALL 1 Search method --> If your device does not respond to the ONE FOR ALL 1 after you have tried all the codes listed for your brand. [. . . ] 3. 4. 5. 6. Quick Code Reference Make sure you write down the code for your television in the boxes below and in the battery compartment for future easy reference. 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ssss WWW. ONEFORALL. COM 8 Colour and Brightness Depending on the functions of your original remote control, the ONE FOR ALL 1 may operate the colour and brightness settings of your television. Colour (+) = Press and release MAGIC then hold Volume (+) Colour (-) = Press and release MAGIC then hold Volume (-) Brightness (+) = Press and release MAGIC then hold Channel (+) Brightness (-) = Press and release MAGIC then hold Channel (-) Trouble Shooting Problem & Solution Problem: Your brand is not listed in the code section?The ONE FOR ALL 1 does not operate your device(s)?Solution: Try the search method on page 7. A) Try all the codes listed for your brand. [. . . ]