User manual ONKYO C-701A

[. . . ] English Compact Disc Player C-701A Before using Connections Instruction Manual COMPACT DISC PLAYER Operations STANDBY / ON STANDBY DISPLAY C -701A Other Information Before using Thank you for purchasing . . . Thank you for purchasing Onkyo C-701A CD player. Please read this manual thoroughly before making connections and plugging in the unit. Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new C-701A. Please retain this manual for future reference. Main Features · A compact, discrete component with 155mm (6-1/8") wide · Dual-Channel Optical Digital Outputs · Linear Single-bit D/A Converter WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN AVIS RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] (Refer to the R-801A instruction manual for more information. ) · CD Dubbing Simple CD dubbing using an MD recorder or CD recorder is possible with the pressing of a single button. (Refer to the MD-101A or CDR-201A Instruction Manual for more information). · CD/MD/CDR Synchro Recording When using an MD recorder or CD recorder to record from the CD player, you can record with simply starting on a CD player. (Refer to the MD-101A or CDR-201A instruction manual for more information. ) · Dubbing a specific track from CD You can specify a track on a CD and easily dub it to a connected MD recorder or CD recorder. (Refer to the MD-101A or CDR-201A instruction manual for more information. ) 8 Using the remote controller The unit is not shipped with a remote controller. However, you can use a remote controller (RC466S) that is shipped with the R-801A. Remote controller RC-466S When the remote controller RC-466S supplied with the R-801A is used, operate the remote controller pointing towards the R-801A's remote sensor. Be sure to make the connection securely. If the connection is incomplete, you cannot use the remote controller to operate the unit. R-801A Remote control sensor 30° 30° Notes · Place the unit away from strong light such as direct sunlight or inverted fluorescent light which can prevent proper operation of the remote controller. · Using another remote controller of the same type in the same room or using the unit near equipment which uses infrared rays may cause operational interference. · Do not put any object such as a book on the remote controller. The buttons of the remote controller may be pressed by mistake and drain the batteries. · Make sure the audio rack doors do not have colored glass. Placing the unit behind such doors may prevent proper remote controller operation. · If there is any obstacle between the remote controller and the remote control sensor, the remote controller will not operate. Before Using Connections 5m C-701A RC-466S 9 Operations Other Information Connecting to the other components Before connecting · Do not connect the unit's AC power cord to a wall outlet until you have completed all the other connections. · On each pair of connectors, a red connector (marked R) corresponds to the right channel, and a white connector (marked L) to the left channel. Connect white plugs of audio connection cables to L connectors and connect red plugs of audio connection cables to R connectors. Audio connection cable To L connectors To R connectors (White) (Red) To L connectors (White) To R connectors (Red) · Insert the plug securely. If the connection is incomplete, noise or malfunction may result. Improper connection Insert completely · When you use a digital audio optical cable, do not bend it sharply nor coil it tightly. · Bundling an audio connection cable with the power cord or speaker cord may degrade the sound quality. · To use the unit with the other Onkyo Separate Collection series components, follow the connection diagram in the R-801A instruction manual to connect the unit to the system. Note: The 230-240 V model is shown in the following illustrations. 10 Connections ANALOG OUTPUT L R DIGITAL OUTPUT REMOTE CONTROL OPTICAL AC OUTLET AC 230-240 V UNSWITCHED 100 W MAX. [. . . ] See your amplifiers operating instructions for more information. (See page 19) · Replace the disc. · Place the CD player in a more stable location. (See page 19) · Replace the disc. [. . . ]